Agricultural Journal

Year: 2010
Volume: 5
Issue: 3
Page No. 131 - 138


Abbott, T.P., L.W. Tijarks and M.O. Bagby, 1987. Kenaf lignin structure by correlation of CMR, FTIR and chemical analysis. Proceedings of Tappi Pulping Conference, Nov. 15, Washington, DC., pp: 177-183.

Abdul Khalil, H.P.S., A.F.I. Yusra, A.H. Bhat and M. Jawaid, 2010. Cell wall ultrastructure, anatomy, lignin distribution and chemical composition of Malaysian cultivated kenaf fiber. Ind. Crops Prod., 31: 113-121.
CrossRef  |  

Akgul, M. and A. Tozluoglu, 2009. A comparison of soda and soda-AQ pulps from cotton stalks. Afr. J. Biotechnol., 8: 6127-6133.
Direct Link  |  

Alexandre, F., L. Robert, B. Jean-Pierre and B. Sylvain, 2007. Optimum refining of TMP pulp by fractionation after the first refining stage. Proceedings of the International Mechanical Pulping Conference, May 6-9, Minneapolis, MN., pp: 23-31.

Aravamuthan, R., J. Lechlitner and G. Lougen, 2002. High yield pulping of kenaf for corrugating medium. Proceedings of Paper presented at the TAPPI, Fall Technical Conference.

Ashori, A., 2006. Nonwood fibers: A potential source of raw material in papermaking. Polym. Plast. Technol. Eng., 45: 1133-1136.
Direct Link  |  

Ates, S., Y.H. Ni, M. Akgul and A. Tozluoglu, 2008. Characterization and evaluation of Paulownia elongota as a raw material for paper production. Afr. J. Biotechnol., 7: 4153-4158.
Direct Link  |  

Biermann, C.J., 1996. Handbook of Pulping and Papermaking. 2nd Edn., Academic Press, San Diego, California.

Casey, J.P., 1981. Pulp-chemistry and Technology. 3rd Edn., Vol. 3, Jhon Wiley and Sons, New York, USA.

Clark, J.A., 1985. Pulp Technology and Treatment for Paper. 2nd Edn., Miller-Freeman, San Francisco, CA, USA.

Cunningham, R.L., M.E. Carr and M.O. Bagby, 1986. Hemicellulose isolation from annual plants. Proceedings of the 8th Symposium on Biotechnology for Fuels and Chemicals, May 13-16, Gatlingburg, Tennessee, pp: 159-168.

Duckart, L., E. Byers and N.S. Thompson, 1988. The structure of xylan from kenaf. Cellulose Chem. Technol., 22: 29-31.

Dutt, D., J.S. Upadhyay, B. Singh and C.H. Tyagi, 2009. Studies on Hibiscus cannabinus and Hibiscus sabdariffa as an alternative pulp blend for softwood: An optimization of kraft delignification process. Ind. Crops Prod., 29: 16-26.
CrossRef  |  

Firouzabadi, D.M., A. Tavasoli and S. Mahdavi, 2008. Repalcing imported long fiber pulp with kenaf bast fiber soda pulp to improve quality of paper made from bagasse soda pulp. Iranan J. Wood Paper Sci. Res., 23: 157-168.
Direct Link  |  

Fisher, G., 1994. Availability of kenaf fibers for the U.S. paper industry. Proceeding of the Tappi Puping Conference, November 6-10, 1994, San Diego, CA., USA., pp: 91-94.

Goring, D.A.I., 1971. Polymer Properties of Lignin and Lignin Derivatives. In: Lignins: Occurrence, Formation, Structure and Reactions, Sarkanen, K.V. and C.H. Ludwig (Eds.). Wiley Interscience, New York, pp: 916.

Han, J.S. and T.A. Rymsza, 1999. Determining the minimum conditions for soda-AQ pulping of kenaf bast, core and whole stalk fibers. Proceeding of the 2nd Annual American Kenaf Society Conference, Feb. 25-26, Menger Hotel, San Antonio, TX, pp: 1-8.

Hedjazi, S., O. Kordsachia, A.J. Latibari and U. Tschirner, 2009. Alkaline sulphite/anthraquinone (AS/AQ) pulping of rice straw and TCF bleaching of pulp. Appita J., 62: 137-145.
Direct Link  |  

Heise, O.U., 2003. Strength-enhancing Effects of Combined Treatment of Indutrial Refining, Cationic Starch and Dynamic nip Wet-pressing on Commercial Pulp Furnishes. University of Wisconsin-Madison, Madison, Wisconsin, pp: 252.

Hng, P.S., B.N. Khor, N. Tadashi, A.S.N. Aini and M.T. Paridah, 2009. Anatomical structure and fiber morphology on new kenaf varieties. Asian J. Scientific Res., 2: 161-166.
Direct Link  |  

Holton, H., 1977. Soda additive softwood pulping: A major new process. Pulp Paper Can., 78: T218-T223.

Jimenez, L., L. Serrano, A. Rodriguez and R. Sanchez, 2009. Soda-anthraquinone pulping of palm oil empty fruit bunches and beating of the resulting pulp. Bioresour. Technol., 100: 1262-1267.
CrossRef  |  

Juhua, W., H. Yanzao, R. Wang, H. Zhibin, X. Chongyun and L. Yyfeng, 1996. Morphological charactristics and ultrastructure of xylem CMP fibers. Proceedings of the 3rd International Non- wood Fiber Pulping and Papermaking Conference, Oct. 15-18, Beijing, China, pp: 421-430.

Kaldor, A.F., C. Karlgren and H. Werwest, 1990. Kenaf: A fast growing fiber source for papermaking. Tappi J., 73: 205-209.
Direct Link  |  

Kawai, S., 2005. Development of high-performance kenaf bast oriented fiberboard and kenaf core binderless particleboard. Sustainable Humanospere, 1: 12-12.
Direct Link  |  

Keshk, S., S. Wiwin and S. Kazuhiko, 2006. Physicochemical characterization of different treatment sequences on kenaf bast fiber. Carbohydrate Polymers, 65: 202-206.
CrossRef  |  

Khristova, P. and I. Karar, 1999. Soda-anthraquinone pulp form three Acacia nilotica species. Bioresour. Technol., 68: 209-213.
CrossRef  |  

Khristova, P., O. Kordsachia and T.O. Khider, 2005. Alkaline pulping with additives of date palm rachis and leaves from Sudan. Bioresour. Technol., 96: 79-85.
CrossRef  |  Direct Link  |  

Khristova, P., O. Kordsachia, R. Patt, T.O. Khider and I. Karrar, 2002. Alkaline pulping with additives of kenaf from Sudan. Ind. Crops Prod., 15: 229-235.
CrossRef  |  Direct Link  |  

Khristova, P., S. Bentcheva and I. Karar, 1998. Soda-AQ pulp blends from kenaf and sunflower stalks. Bioresour. Technol., 66: 99-103.
CrossRef  |  Direct Link  |  

Kock, G., 2006. Raw Material for Pulp. In: Handbook of Pulp, Sixta, H. (Ed.). Vol. 1. Wiley-VCH Verlag GmbH and Co., Weinheim, pp: 21-68.

Law, K., C. Daneault and R. Guimond, 2007. Mechanical pulp problem. Proceeding of the Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC), (PPTAC`07), Canada, pp: A65-A69.

Mahapatra, B.S., S. Mitra, T. Ramasubramanian and M.K. Sinha, 2009. Research on jute (Corchorus olitorius and C. capsularis) and kenaf (Hibiscus cannabinus and H. sabdariffa): Present atatus and future perspective. Indian J. Agric. Sci., 79: 951-967.

Myers, G.C. and M.O. Bagby, 1994. Suitabilty of kenaf CTMP for linerboard. Tappi J., 77: 113-118.
Direct Link  |  

Nezamoleslami, A., K. Suzuki and T. Kadoya, 1997. Preparation and properties of retted kenaf bast fiber pulp and evaluation as substitute for Manila hemp pulp. J. Pack. Sci. Technol., 6: 339-347.
Direct Link  |  

Ogunsile, B.O., M.A. Omotoso and M.A. Onilude, 2006. Comparative soda pulps from the mid-rib, pseudostem and stalk of Musa paradisiaca. J. Boil. Sci., 6: 1047-1052.
CrossRef  |  Direct Link  |  

Ohtani, Y., B.B. Mazumder and K. Sameshima, 2001. Influence of the chemical composition of kenaf bast and core on the alkaline pulping response. J. Wood Sci., 47: 30-35.
CrossRef  |  

Palmer, E.R., J.A. Gibbs, S. Ganguli and A.P. Gutta, 1986. Pulping characteristics of Eucalyptus species grown in Malawi. Tropical Development Research Institute, London, UK.

Paridah, M.T., A.W.N. Hafizah, A. Zaidon, I. Azmi, M.Y.M. Nor and M.Y.N. Yuziah, 2009. Bonding properties and performance of multi-layered kenaf board. J. Tropical For. Sci., 21: 113-122.
Direct Link  |  

Ralph, J., R.D. Hatfield, F. Lu, J.H. Grabber, H.G. Jung, J.S. Han and S.A. Ralph, 1995. Kenafs amazing lignin. Proceedings of the 8th International Symposium on wood and Pulping Chemistry, June 6-9, Helsinki, Finland, pp:1-11.

Rodragueza, A., A. Morala, L. Serranoa, J. Labidib and L. Jimanez, 2008. Rice straw pulp obtained by using various methods. Bioresour. Technol., 99: 2881-2886.
CrossRef  |  

Rowell, J.K., J.S. Han and J.S. Rowell, 2000. Characterization and factors effecting fiber properties. Nat. Polymers Agrofibers Composites.

Rowell, R.M., R.A. Young and J.K. Rowell, 1997. Paper and Composites from Agro-based Resources. Lewis, New York.

Rushdan, I., 2003. Effect of refining on fibre morphology and drainage of soda pulp derived from oil palm empty fruit bunches. J. Tropical For. Prod., 6: 26-34.

Rushdan, I., 2003. Structural, mechanical and optical properties of recycled paper blended with oil palm empty fruit bunch pulp. J. Oil Palm Res., 15: 28-34.
Direct Link  |  

Sixta, H., 2006. Handbook of Pulp. Weily-Vch Verlag GmbH and Co. KGaA, Weinheim.

Sixta, H., 2006. Pulp Properties and Applications. In: Handbook of Pulp, 2nd Edn., Sixta, H. (Ed.) Vol. 2. KGA, Wiley-VCH Verlag GmbH Co., Weinheim, pp: 1009-1067.

Sjostrom, E., 1993. Wood Chemistry: Fundamentals and Applications. 2nd Edn., San Diego, USA.

Smook, G.A., 1992. Handbook for Pulp and Paper Technologists. 2nd Edn., Angus Wilde Publications, Vancouver, Canada, ISBN-13: 9780969462811, Pages: 419.

Ververis, C., K. Georghiou, N. Christodoulakis, P. Santas and R. Santas, 2004. Fiber dimensions, lignin and cellulose content of various plant materials and their suitability for paper production. Ind. Crops Prod., 19: 245-254.
CrossRef  |  Direct Link  |  

Villar, J.C., E. Revilla, N. Gomez, J.M. Carbajo and J.L. Simon, 2009. Improving the use of kenaf for kraft pulping by using mixtures of bast and core fibers. Ind. Crops Prod., 29: 301-307.
CrossRef  |  

Voulgaridis, E., C. Passialis and A. Grigoriou, 2000. Anatomical characterics and properties of kenaf stems (Hibiscus cannabinus). IAWA J., 21: 435-442.
Direct Link  |  

Webber III, C.L., 1992. Varietal differences in kenaf yield components. Tappi J., 75: 153-155.

Xie, L., T. Chong, W. Li and Y. Long, 1988. Sugar components in hemicellulose of cotton stalk and kenaf. Cellulose Chem. Technol., 22: 399-403.

Xu, E.C., 2001. APMP pulps from non-wood fibers Part 1: Kenaf and straw. Appita J., 54: 44-48.

Yu, Y., K. Koljonen and H. Paulauro, 2002. Surface chemical composition of some non-wood pulps. Ind. Crops Prod., 15: 123-130.
CrossRef  |  

Design and power by Medwell Web Development Team. © Medwell Publishing 2021 All Rights Reserved