Abstract: The stationary logical object is understood to be its identification with an Adequate finite-automation model among set of finite automation. Where two completely different aims are being pursued (Object logical structural model construction and device logical control) serious contradictions might arise. With help of an Adequate model received, one can try both to construct appropriate structural model of the Computing Unit (CU) and considering the object as a control object to control it. A digital signal processor is used for the development of CO which represents the logical object and its structural model under construction. The principle distinction between finite-automation identification for developing of the Logical structure object model and for logical control of the technological device is shown in this study. The object self-control can be reached by the conversion of the potential dynamic technological object to the guided dynamic object.