References

Al-Rousan, R.Z., 2015. Satisfactory margin of safety against shear failure of lightweight reinforced concrete beams: 3D finite element modeling. KSCE J. Civil Eng., 20: 1482-1492.
CrossRef  |  Direct Link  |  

Almassri, B., A. Kreit, F. Al Mahmoud and R. Francois, 2015. Behaviour of corroded shear-critical reinforced concrete beams repaired with NSM CFRP rods. Comp. Struct., 123: 204-215.
CrossRef  |  Direct Link  |  

Dahl, Y.M. and Y.G. Pronina, 2006. Deformation of spherical pore in nonlinear-elastic solid. Bull. Russia Acad. Sci. Phys., 70: 1533-1535.

Gasratova, N.A. and I.A. Stareva, 2015. Reliability assessment of reinforced concrete structures. Proceedings of the International Conference Stability and Control Processes, October 5-9, 2015, Saint Petersburg, Russian, pp: 378-381.

Gasratova, N.A., 2014. Study of building an analytical solution of the axisymmetric problem of linear elasticity in stresses as exemplified by finding the stress-strainstate of an ellipsoid cocavityunder the inner pressure. ARPN J. Eng. Applied Sci., 9: 2259-2267.

Grekov, M.A. and N.F. Morozov, 2006. Equilibrium cracks in composites reinforced with unidirectional fibres. J. Applied Math. Mech., 70: 945-955.
CrossRef  |  Direct Link  |  

Grekov, M.A., 2002. A model of fracture under biaxial loading. Proceedings of the 21st International Conference on Offshore Mechanics and Arctic Engineering, Volume 3, June 23-28, 2002, Oslo, pp: 405-409.

Grekov, M.A., 2002. A slightly curved crack in an isotropic body. The Bulletin of Series No. 1, Saint Petersburg University, Mathematics, Mechanics, Astronomy, pp: 74-80.

Grekov, M.A., 2011. Two types of interface defects. J. Applied Math. Mech., 75: 476-488.
CrossRef  |  Direct Link  |  

Hemamalini, S. and S. Gopinathan, 2015. Behaviour of concrete structure under impact and blast load. Int. J. Applied Eng. Res., 10: 13261-13282.

Kolpak, E.P. and L.S. Maltseva, 2015. Rubberlike membranes at inner pressure. Contemp. Eng. Sci., 8: 1731-1742.
CrossRef  |  Direct Link  |  

Kolpak, E.P., L.S. Maltseva and S.E. Ivanov, 2015. On the stability of compressed plate. Contemp. Eng. Sci., 8: 933-942.
CrossRef  |  

Mobasher, B., Y. Yao and C. Soranakom, 2015. Analytical solutions for flexural design of hybrid steel fiber reinforced concrete beams. Eng. Struct., 100: 164-177.
CrossRef  |  Direct Link  |  

Musmar, M.A., M.I. Rjoub and M.A. Abdel Hadi, 2014. Nonlinear finite element analysis of shallow reinforced concrete beams using solid65 element. ARPN J. Eng. Applied Sci., 9: 85-89.

Pronina, Y., 2013. Analytical solution for the general mechanochemical corrosion of an ideal elastic-plastic thick-walled tube under pressure. Int. J. Solids Struct., 50: 3626-3633.
CrossRef  |  Direct Link  |  

Pronina, Y.G., 2010. Estimation of the life of an elastic tube under the action of a longitudinal force and pressure under uniform surface corrosion conditions. Russ. Metallurgy, 2010: 361-364.
CrossRef  |  Direct Link  |  

Pronina, Y.G., 2011. Thermal elastic stress analysis for a tube under general mechanic-chemical corrosion conditions. Proceedings of the 4th International Conference on Computational Methods for Coupled Problems in Science and Engineering, June 20-22, 2011, Kos Island, Greece, pp: 1408-1415.

Pronina, Y.G., 2013. Lifetime assessment for an ideal elastoplastic thick-walled spherical member under general mechanic-chemical corrosion conditions. Proceedings of the 12th International Conference on Computational Plasticity, Fundamentals and Applications, September 3-5, 2013, Barcelona, Spain, pp: 729-738.

Pronina, Y.G., 2015. Analytical solution for decelerated mechanic-chemical corrosion of pressurized elastic-perfectly plastic thick-walled spheres. Corrosion Sci., 90: 161-167.

Pronina, Y.G., 2015. Comment on new understanding of the effect of hydrostatic pressure on the corrosion of Ni-Cr-Mo-V high strength steel. Corrosion Sci., 100: 672-673.
CrossRef  |  Direct Link  |  

Sedova, O. and Y. Pronina, 2015. Generalization of the Lame problem for three-stage decelerated corrosion process of an elastic hollow sphere. Mech. Res. Commun., 65: 30-34.
CrossRef  |  Direct Link  |  

Sedova, O.S. and Y.G. Pronina, 2015. Calculation of the optimal initial thickness of a spherical vessel operating in mechanic-chemical corrosion conditions. Proceedings of the 3rd International Conference on Stability and Control Processes, October 5-9, 2015, St. Petersburg, Russia, pp: 436-439.

Sedova, O.S. and Y.G. Pronina, 2015. Taking account of hydrostatic pressure in the modeling of corrosion of thick spherical shells. Proceedings of the 2015 International Conference on Mechanics-Seventh Polyakhov's Reading, February 2-6, 2015, Saint Petersburg, Russia -.

Sedova, O.S., L.A. Khaknazarova and Y.G. Pronina, 2014. Stress concentration near the corrosion pit on the outer surface of a thick spherical member. Proceedings of the 2014 Tenth International Vacuum Electron Sources Conference, 30 June-July 4, 2014, Saint-Petersburg, Russia -.

Vasudevan, G. and S. Kothandaraman, 2015. RC beams retrofitted using external bars with additional anchorages-a finite element study. Comput. Concrete, 16: 415-428.