References

Agrawal, P.C., 1992. Review of passive systems and passive strategies for natural heating and cooling of buildings in Libya. Int. J. Energy Res., 16: 101-117.
CrossRef  |  Direct Link  |  

Al-Sanea, S.A. and M.F. Zedan, 2002. Optimum Insulation Thickness for Building Walls in a Hot-Dry Climate. Int. J. Ambient Energy, 23: 115-126.
Direct Link  |  

Ali-Toudert, F. and H. Mayer, 2006. Numerical study on the effects of aspect ratio and orientation of an urban street canyon on outdoor thermal comfort in hot and dry climate. Build. Environ., 41: 94-108.
CrossRef  |  

Amado, M. and F. Poggi, 2012. Towards solar urban planning: A new step for better energy performance. Energy Procedia, 30: 1261-1273.
CrossRef  |  Direct Link  |  

Andersson, B., W. Place, R. Kammerud and M.P. Scofield, 1985. The impact of building orientation on residential heating and cooling. Energy Build., 8: 205-224.
Direct Link  |  

Bahadori, M.N., 1978. Passive cooling systems in Iranian architecture. Sci. Am., 238: 144-150.
Direct Link  |  

Bekkouche, S.M.A., T. Benouaz, M.R. Yaiche, M.K. Cherier and M. Hamdani et al., 2011. Introduction to control of solar gain and internal temperatures by thermal insulation, proper orientation and eaves. Energy Build., 43: 2414-2421.
Direct Link  |  

Cemesova, A., C.J. Hopfe and Y. Rezgui, 2013. An approach to facilitating data exchange between BIM environments and a low energy design tool. Proceedings of the 13th Conference of International Building Performance Simulation Association, August 26-28, 2013, Cardiff University, Chambery, France, pp: 3234-3241.

Daouas, N., 2011. A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads. Appl. Energy, 88: 156-164.
Direct Link  |  

Diakaki, C., E. Grigoroudis and D. Kolokotsa, 2008. Towards a multi-objective optimization approach for improving energy efficiency in buildings. Energy Build., 40: 1747-1754.
CrossRef  |  Direct Link  |  

Faizi, F., M. Noorani, A. Ghaedi and M. Mahdavinejad, 2011. Design an optimum pattern of orientation in residential complexes by analyzing the level of energy consumption (Case study: Maskan Mehr Complexes, Tehran, Iran). Proc. Eng., 21: 1179-1187.
CrossRef  |  Direct Link  |  

Felske, J.D., 1978. The effect of off-south orientation on the performance of flat-plate solar collectors. Solar Energy, 20: 29-36.
CrossRef  |  Direct Link  |  

Foruzanmehr, A. and F. Nicol, 2008. Towards new approaches for integrating vernacular passive-cooling system into modern building in warm-dry climates of Iran. Proceedings of Conference on Air Conditioning and the low Carbon Cooling Challenge, July 27-29, 2008, Oxford Brookes University, London, UK., pp: 1-12.

Futrell, B.J., E.C. Ozelkan and D. Brentrup, 2015. Optimizing complex building design for annual daylighting performance and evaluation of optimization algorithms. Energy Build., 92: 234-245.
Direct Link  |  

Gagliano, A., F. Patania, F. Nocera and C. Signorello, 2014. Assessment of the dynamic thermal performance of massive buildings. Energy Build., 72: 361-370.
Direct Link  |  

Garcia, H.V., A. Esteves and A. Pattini, 2002. Passive solar systems for heating, daylighting and ventilation for rooms without an equator-facing facade. Renewable Energy, 26: 91-111.
Direct Link  |  

Gopinathan, K.K., 1991. Solar radiation on variously oriented sloping surfaces. Solar Energy, 47: 173-179.
CrossRef  |  

Haase, M. and A. Amato, 2009. An investigation of the potential for natural ventilation and building orientation to achieve thermal comfort in warm and humid climates. Solar Energy, 83: 389-399.

Hadavand, M. and M. Yaghoubi, 2008. Thermal behavior of curved roof buildings exposed to solar radiation and wind flow for various orientations. Appl. Energy, 85: 663-679.
Direct Link  |  

Han, G., J. Srebric and P.E. Enache, 2015. Different modeling strategies of infiltration rates for an office building to improve accuracy of building energy simulations. Energy Build., 86: 288-295.
Direct Link  |  

Harmati, N., Z. Jaksic and N. Vatin, 2014. Heat balance method application in building energy performance simulation. Appl. Mech. Mater., 740: 1572-1579.
Direct Link  |  

Heidari, S. and S. Sharples, 2002. A comparative analysis of short-term and long-term thermal comfort surveys in Iran. Energy Build., 34: 607-614.
CrossRef  |  Direct Link  |  

Kontoleon, K.J. and D.K. Bikas, 2002. Modeling the influence of glazed openings percentage and type of glazing on the thermal zone behavior. Energy Build., 34: 389-399.
Direct Link  |  

Kontoleon, K.J. and E.A. Eumorfopoulou, 2008. The influence of wall orientation and exterior surface solar absorptivity on time lag and decrement factor in the Greek region. Renewable Energy, 33: 1652-1664.
Direct Link  |  

Kontoleon, K.J. and E.A. Eumorfopoulou, 2010. The effect of the orientation and proportion of a plant-covered wall layer on the thermal performance of a building zone. Build. Environ., 45: 1287-1303.
Direct Link  |  

Koranteng, C. and E.G. Abaitey, 2010. The effects of form and orientation on energy performance of residential buildings in Ghana. J. Sci. Technol., 30: 71-81.
Direct Link  |  

Krygiel, E. and B. Nies, 2008. Green BIM: Successful Sustainable Design with Building Information Modeling. John Wiley and Sons, New York, USA., ISBN-13: 9780470390467, Pages: 241.

Moon, H.J., M.S. Choi, S.K. Kim and S.H. Ryu, 2011. Case studies for the evaluation of interoperability between a bim based architectural model and building performance analysis programs. Proceedings of 12th Conference of International Building Performance Simulation Association, November 14-16, 2011, Dankook University, Yongin, South Korea, pp: 1521-1526.

Morrissey, J., T. Moore and R.E. Horne, 2011. Affordable passive solar design in a temperate climate: An experiment in residential building orientation. Renewable Energy, 36: 568-568.
Direct Link  |  

Motawa, I. and K. Carter, 2013. Sustainable BIM-based evaluation of buildings. Procedia Social Behav. Sci., 74: 419-428.
CrossRef  |  Direct Link  |  

Murgul, V., D. Komatina, V. Nikolic and N. Vatin, 2015. Passive solar heating: Its role in architectural shaping. Appl. Mech. Mater., 725: 1552-1556.
Direct Link  |  

Numan, M.Y., F.A. Almaziad and A.W.A. Khaja, 1999. Architectural and urban design potentials for residential building energy saving in the Gulf region. Appl. Energy, 64: 401-410.
Direct Link  |  

O'Brien, W., T. Kesik and A. Athienitis, 2008. The use of solar design days in a passive solar house conceptual design tool. Proceedings of the 3rd Conference on Canadian Solar Buildings, August 20-22, 2008, University of Toronto, Fredericton, New Brunswick, Canada, pp: 164-171.

Ozel, M., 2011. Effect of wall orientation on the optimum insulation thickness by using a dynamic method. Appl. Energy, 88: 2429-2435.
Direct Link  |  

Ozel, M., 2013. Determination of optimum insulation thickness based on cooling transmission load for building walls in a hot climate. Energy Convers. Manage., 66: 106-114.
Direct Link  |  

Ozel, M., 2013. Thermal, economical and environmental analysis of insulated building walls in a cold climate. Energy Convers. Manage., 76: 674-684.
Direct Link  |  

Pacheco, R., J. Ordonez and G. Martinez, 2012. Energy efficient design of building: A review. Renewable Sustainable Energy Rev., 16: 3559-3573.
Direct Link  |  

Papadopoulos, A.M. and E. Giama, 2007. Environmental performance evaluation of thermal insulation materials and its impact on the building. Build. Environ., 42: 2178-2187.
Direct Link  |  

Perlova, E., S. Karpova, X.M. Rakova, E. Bondarenko and M. Platonova et al., 2015. The architectural concept of the building with low energy consumption. Appl. Mech. Mater., 725: 1580-1588.
Direct Link  |  

Poel, B., G. van Cruchten and C.A. Balaras, 2007. Energy performance assessment of existing dwellings. Energy Build., 39: 393-403.
CrossRef  |  Direct Link  |  

Raychaudhuri, B.C., S. Ali and D.P. Garg, 1965. Indoor climate of residential buildings in hot arid regions: Effect of orientation. Build. Sci., 1: 79-88.
CrossRef  |  Direct Link  |  

Sedki, A., N. Hamza and T. Zaffagnini, 2013. Effect of orientation on indoor thermal neutrality in winter season in hot arid climates case study: Residential building in greater Cairo. Int. J. Eng. Technol., 5: 712-716.
Direct Link  |  

Shirzadi, M. and M. Nagashzadeghan, 2015. Building energy optimization using sequential search approach for different climates of Iran. Int. J. Renewable Energy Res., 5: 210-216.
Direct Link  |  

Singh, M.K., S. Mahapatra and S.K. Atreya, 2011. Solar passive features in vernacular architecture of North-East India. Solar Energy, 85: 2011-2022.
Direct Link  |  

Skibin, D. and C. Noach, 1982. Optimal oreintation of buildings in the Negev semi-arid conditions. Energy Build., 4: 185-189.
CrossRef  |  Direct Link  |  

Tzempelikos, A. and A.K. Athienitis, 2007. The impact of shading design and control on building cooling and lighting demand. Solar Energy, 81: 369-382.
Direct Link  |  

Yang, L., B.J. He and M. Ye, 2014. Application research of ECOTECT in residential estate planning. Energy Build., 72: 195-202.
Direct Link  |  

Yi, H., R.S. Srinivasan and W.W. Braham, 2015. An integrated energy-emergy approach to building form optimization: Use of EnergyPlus, emergy analysis and Taguchi-regression method. Build. Environ., 84: 89-104.
CrossRef  |  

Yohanis, Y.G. and B. Norton, 2002. Useful solar heat gains in multi-zone non-domestic buildings as a function of orientation and thermal time constant. Renewable Energy, 27: 87-95.
Direct Link  |  

Zeng, M.N., 2012. Future of green BIM designing and tools. Adv. Mater. Res., 374: 2557-2561.
Direct Link  |