References

Bai, J., X. Yang, Y. Shi, S. Xu and J. Yang, 2012. Fabrication of directional SiC porous ceramics using Fe₂O₃ as pore-forming agent. Mater. Lett., 78: 192-194.
Direct Link  |  

Can, A., M. Herrmann, D.S. McLachlan, I. Sigalas and J. Adler, 2006. Densification of liquid phase sintered silicon carbide. J. Eur. Ceram. Soc., 26: 1707-1713.
Direct Link  |  

Castillo-Rodriguez, M., A. Munoz and A. Dominguez-Rodriguez, 2006. Effect of atmosphere and sintering time on the microstructure and mechanical properties at high temperatures of α-SiC sintered with liquid phase Y2O3-Al2O3. J. Eur. Ceram. Soc., 26: 2397-2405.
Direct Link  |  

Chen, F., Y. Yang, Q. Shen and L. Zhang, 2012. Macro/micro structure dependence of mechanical strength of low temperature sintered silicon carbide ceramic foams. Ceram. Intl., 38: 5223-5229.
Direct Link  |  

Cho, G.S., G.M. Kim and S.W. Park, 2009. Fabrication of porous reaction bonded silicon carbide with multi-layered pore structures. J. Korean Ceram. Soc., 46: 534-539.
CrossRef  |  Direct Link  |  

Dey, A., N. Kayal and O. Chakrabarti, 2011. Preparation of porous SiC ceramics by an infiltration technique. Ceram. Intl., 37: 223-230.
Direct Link  |  

Fukushima, M., Y. Zhou and Y.I. Yoshizawa, 2009. Fabrication and microstructural characterization of porous SiC membrane supports with Al₂O₃-Y₂O₃ additives. J. Membr. Sci., 339: 78-84.
Direct Link  |  

Goodhew, P.J., J. Humphreys and R. Beanland, 2000. Electron Microscopy and Analysis. 3rd Edn., CRC Press, Boca Raton, Florida, USA., Pages: 259.

Jang, B.K. and Y. Sakka, 2008. Influence of microstructure on the thermophysical properties of sintered SiC ceramics. J. Alloys Compd., 463: 493-497.
Direct Link  |  

Maity, A., D. Kalita, N. Kayal, T. Goswami and O. Chakrabarti et al., 2012. Oxidation behavior of SiC ceramics synthesized from processed cellulosic bio-precursor. Ceram. Intl., 38: 4701-4706.
Direct Link  |  

Pastila, P., V. Helanti, A.P. Nikkila and T. Mantyla, 2001. Environmental effects on microstructure and strength of SiC-based hot gas filters. J. Eur. Ceram. Soci., 21: 1261-1268.
Direct Link  |  

Philip, P. and L. Fagbenle, 2014. Design of lee’s disc electrical method for determining thermal conductivity of a poor conductor in the form of a flat disc. Intl. J. Innovation Sci. Res., 9: 335-343.
Direct Link  |  

Schwetz, K.A., 2000. Silicon Carbide based Hard Materials. In: Handbook of Ceramic Hard Materials, Riedel, R. (Ed.). Wiley-VCH, Weinheim, Germany, pp: 683-748.

Soy, U., A. Demir and F. Caliskan, 2011. Effect of bentonite addition on fabrication of reticulated porous SiC ceramics for liquid metal infiltration. Ceram. Intl., 37: 15-19.
Direct Link  |  

Streitwieser, D.A., N. Popovska and H. Gerhard, 2006. Optimization of the ceramization process for the production of three-dimensional biomorphic porous SiC ceramics by Chemical Vapor Infiltration (CVI). J. Eur. Ceram. Soc., 26: 2381-2387.
Direct Link  |  

Tekkaya, A.E. and K. Lange, 2000. An improved relationship between Vickers hardness and yield stress for cold formed materials and its experimental verification. CIRP. Ann. Manuf. Technol., 49: 205-208.
Direct Link  |  

Uhlmann, D.R., H.K. Bowen and W.D. Kingery, 1976. Introduction to Ceramics. 2nd Edn., Wiley, New York, USA., Pages: 740.

Wang, H., H. Takashima, Y. Miyakawa and Y. Kanno, 2005. Development of catalyst materials being effective for microwave sterilization. Sci. Technol. Adv. Mater., 6: 921-926.
Direct Link  |