References

Bang-Zhong, L. and Z. Jin-Jin, 2005. Research on surface characteristics of non-traditional finishing. J. Zhejiang Univ. Sci. A., 6: 1152-1157.
Direct Link  |  

Chang, G.W., B.H. Yan and R.T. Hsu, 2002. Study on cylindrical magnetic abrasive finishing using unbounded magnetic abrasives. Int. J. Mach. Tools Manuf., 42: 575-583.

Jain, V.K., P. Kumar, P.K. Behra and S.C. Jayswal, 2001. Effect of working gap and circumferential speed on the performance of magnetic abrasive finishing process. Wear, 250: 384-390.
CrossRef  |  

Jayakumar, P., 2001. Semi magnetic abrasive machining. Proceedings of the 4th International Conference on Mechanical Engineering (ICME’01), December 26-28, 2001, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh, pp: 81-85.

Khairy, A.B., 2001. Aspects of surface and edge finish by magnetoabrasive particles. J. Mater. Process. Technol., 116: 77-83.
Direct Link  |  

Kwak, J.S. and C.M. Shin, 2011. Parameter optimization and development of prediction model for second generation magnetic abrasive polishing of AZ31B plate. Proceedings of the International MultiConference on Engineers and Computer Scientists (IMECS’11) Vol. 2, March 16-18, 2011, International Association of Engineers (IAENG), Hong Kong, ISBN:978-988-19251-2-1, pp: 1-7.

Raghuram, M.G.V.S. and S.S. Joshi, 2008. Modeling of polishing mechanism in magnetic abrasive polishing. Proceedings of the 12th International Conference on International Association for Computer Methods and Advances in Geomechanics (IACMAG’08), October 1-6, 2008, IACMAG, Goa, India, pp: 344-352.

Singh, A.K., S. Jha and P.M. Pandey, 2010. Nanofinishing Process for 3D Freeform Surfaces Using Ball End MR Finishing Tool. In: Proceedings of the 36th International MATADOR Conference, Singh, A.K., S. Jha and P.M. Pandey (Eds.). Springer, London, England, UK., ISBN:978-1-84996-431-9, pp: 67-70.

Yamaguchi, H. and T. Shinmura, 1999. Study of the surface modification resulting from an internal magnetic abrasive finishing process. Wear, 225: 246-255.
CrossRef  |  Direct Link  |  

Yamaguchi, H. and T. Shinmura, 2000. Study of an internal magnetic abrasive finishing using a pole rotation system: Discussion of the characteristic abrasive behavior. Precis. Eng., 24: 237-244.
Direct Link  |