References

Airey, G.D., 2003. Rheological properties of styrene butadiene styrene polymer modified road bitumens. Fuel, 82: 1709-1719.
Direct Link  |  

Anderson, D.A., D.W. Christensen, H.U. Bahia, R. Dongre and M. Sharma et al., 1994. Binder characterization and evaluation, volume 3: Physical characterization. Strategic Highway Research Program, National Research Council, Ottawa, Canada.

Auden, C.F., J.A. Sandoval, A. Jerez, F.J. Navarro and F.J.M. Boza et al., 2008. Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen. Polym. Test., 27: 1005-1012.
Direct Link  |  

Bas, D. and I.H. Boyaci, 2007. Modeling and optimization I: Usability of response surface methodology. J. Food Eng., 78: 836-845.
CrossRef  |  Direct Link  |  

Benedetto, H.D. and F. Olard, 2009. DBN Law for the Thermo-Visco-Elasto-Plastic Behaviour of Asphalt Concrete. In: Modeling Asphalt Concrete, Kim, Y. (Ed.). ASCE Press, Virginia, USA., pp: 245-263.

Ekott, E.J. and E.J. Akpabio, 2011. Influence of asphaltene content on demulsifiers performance in crude oil emulsions. J. Eng. Appl. Sci., 6: 200-204.

Fang, C., T. Li, Z. Zhang and D. Jing, 2008. Modification of asphalt by packaging waste‐polyethylene. Polym. Compos., 29: 500-505.
CrossRef  |  Direct Link  |  

Fang, C., T. Li, Z. Zhang and X. Wang, 2008. Combined modification of asphalt by waste PE and rubber. Polym. Compos., 29: 1183-1187.
CrossRef  |  Direct Link  |  

Fawcett, A., T. McNally, G. McNally, F. Andrews and J. Clarke, 1999. Blends of bitumen with polyethylenes. Polym., 40: 6337-6349.
Direct Link  |  

Ferry, J.D., 1980. Viscoelastic Properties of Polymers. 3rd Edn. John Wiley and Sons Inc., New York.

Goodrich, J.L., 1988. Asphalt and polymer modified asphalt properties related to the performance of asphaltic concrete mixes. Proc. Assoc. Asphalt Paving Technol., 57: 116-175.
Direct Link  |  

Heukelom, W. and A. Klomp, 1964. Road design and dynamic loading. Assoc. Asphalt Paving Technol. Proc., 33: 92-125.
Direct Link  |  

Khodaii, A., E. Mousavi, M. Khedmati and A. Iranitalab, 2016. Identification of dominant parameters for stripping potential in warm mix asphalt using response surface methodology. Mater. Struct., 49: 2425-2437.
CrossRef  |  Direct Link  |  

Lepe, A.P., F.M. Boza and C. Gallegos, 2005. Influence of polymer concentration on the microstructure and rheological properties of High-Density Polyethylene (HDPE)-modified bitumen. Energy Fuels, 19: 1148-1152.
CrossRef  |  Direct Link  |  

Lu, X., P. Uhlback and H. Soenen, 2016. Investigation of bitumen low temperature properties using a dynamic shear rheometer with 4mm parallel plates. Intl. J. Pavement Res. Technol., 10: 15-22.
Direct Link  |  

Masson, J. and G. Polomark, 2001. Bitumen microstructure by modulated differential scanning calorimetry. Thermochim. Acta, 374: 105-114.
Direct Link  |  

McNally, T., 2011. Introduction to Polymer Modified Bitumen. In: Polymer Modified Bitumen: Properties and Characterization, McNally, T. (Ed.). Woodhead Publishing Limited, Cambridge, Ontario, ISBN:9780857090485, pp. 1-15.

Mohammad, L.N., Z. Wu, L. Myers, S. Cooper and C. Abadie, 2005. A practical look at the simple performance tests: Louisiana's experience (with discussion). J. Assoc. Asphalt Paving Technol., Vol. 74,

Montgomery, D.C., 2008. Design and Analysis of Experiments. 7th Edn., John Wiley and Sons, New York, USA., ISBN-13: 9780470128664, Pages: 680.

Navarro, F., P. Partal, M.G. Morales, M.M. Alfonso and F.M. Boza et al., 2009. Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: A comparative analysis. J. Ind. Eng. Chem., 15: 458-464.
Direct Link  |  

Noordin, M.Y., V.C. Venkatesh, S. Sharif, S. Elting and A. Abdullah, 2004. Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. J. Mat. Process. Technol., 145: 46-58.
CrossRef  |  Direct Link  |  

Olutaiwo, A.O. and A.S. Adedimila, 2008. Review of advances in grading systems for asphalt binders in hot-mix asphalt pavements. J. Eng. Applied Sciences, 3: 322-331.
CrossRef  |  Direct Link  |  

Panesar, P.S., 2008. Application of response surface methodology in the permeabilization of yeast cells for lactose hydrolysis. Biochem. Eng. J., 39: 91-96.
CrossRef  |  

Polacco, G., P. Kriz, S. Filippi, J. Stastna, D. Biondi and L. Zanzotto, 2008. Rheological properties of asphalt/SBS/clay blends. Eur. Polym. J., 44: 3512-3521.
CrossRef  |  

Punith, V.S. and A. Veeraragavan, 2010. Behavior of reclaimed polyethylene modified asphalt cement for paving purposes. J. Mater. Civ. Eng., 23: 833-845.
Direct Link  |  

Read, J. and D. Whiteoak, 2003. The Shell Bitumen Handbook. 5th Edn., Thomas Telford Publishing, Thomas Telford Ltd., 1 Heron Quay, London, UK., pp: 62-66, 92,136-137.

Sangita, T.A. Khan, Sabina and D.K. Sharma, 2011. Effect of waste polymer modifier on the properties of bituminous mixes. Constr. Build. Mater., 25: 3841-3848.
CrossRef  |  

Van der Poel, C., 1954. A general system describing the visco-elastic properties of bitumens and its relation to routine test data. J. Applied Chem., 4: 221-236.

Yusoff, N.I.M., D. Mounier, G.M. Stephane, M.R. Hainin and G.D. Airey et al., 2013. Modelling the rheological properties of bituminous binders using the 2s2p1d model. Constr. Build. Mater., 38: 395-406.
Direct Link  |  

Yusoff, N.I.M., M.T. Shaw and G.D. Airey, 2011. Modelling the linear viscoelastic rheological properties of bituminous binders. Constr. Build. Mater., 25: 2171-2189.
Direct Link  |  

Zhang, P., Y.C. Cheng, J.L. Tao and Y.B. Jiao, 2016. Molding process design for asphalt mixture based on response surface methodology. J. Mater. Civ. Eng., 28: 04016120-04016120.
Direct Link  |  

Zhu, J., B. Birgisson and N. Kringos, 2014. Polymer modification of bitumen: Advances and challenges. Eur. Polym. J., 54: 18-38.
Direct Link  |