Research Journal of Applied Sciences
Year:
2014
Volume:
9
Issue:
11
Page No.
767 - 770
References
Altintas, Y. and S. Engin, 2001. Generalized modeling of mechanics and dynamics of milling cutters. CIRP. Ann. Manuf. Technol., 50: 25-30.
CrossRef | Chung-Chen, T. and H. Hong, 2002. Comparison of the tool life of tungsten carbides coated by multi-layer TiCN and TiAlCN for end mills using the Taguchi method. J. Mater. Process. Technol., 123: 1-4.
CrossRef | Devillez, A., F. Schneider, S. Dominiak, D. Dudzinski and D. Larrouquere, 2007. Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools. Wear, 262: 931-942.
CrossRef | Direct Link | Engin, S. and Y. Altintas, 2001. Mechanics and dynamics of general milling cutters: Part I: Helical end mills. Int. J. Mach. Tools Manuf., 41: 2195-2212.
CrossRef | Direct Link | Evdokimov, D.V., D.G. Fedorov and D.L. Skuratov, 2014. Thermal stress research of processing and formation of residual stress when end milling of a workpiece. World Applied Sci. J., 31: 51-55.
Ginting, A. and M. Nouari, 2006. Experimental and numerical studies on the performance of alloyed carbide tool in dry milling of aerospace material. Int. J. Mach. Tools Manuf., 46: 758-768.
CrossRef | Direct Link | Ginting, A. and M. Nouari, 2007. Optimal cutting conditions when dry end milling the aeroengine material Ti-6242S. J. Mater. Process. Technol., 184: 319-324.
CrossRef | Direct Link | Khaimovich, A.I. and A.V. Balaykin, 2014. Analysis of titanium alloys plastic properties under severe deformation conditions in machining. ARPN J. Eng. Applied Sci., 9: 1828-1833.
Direct Link | Kivanc, E.B. and E. Budak, 2004. Structural modeling of end mills for form error and stability analysis. Int. J. Mach. Tools Manuf., 44: 1151-1161.
CrossRef | Direct Link | Perez, J., S. Hoyas, D.L. Skuratov, Y.L. Ratis, I.A. Selezneva, P.F. de Cordoba and J.F. Urchueguia, 2008. Heat transfer analysis of intermittent grinding processes. Int. J. Heat Mass Transfer, 51: 4132-4138.
CrossRef | Direct Link | Skuratov, D.L., Y.L. Ratis, I.A. Selezneva, J. Perez, P.F. de Cordoba and J.F. Urchueguia, 2007. Mathematical modelling and analytical solution for workpiece temperature in grinding. Applied Math. Modell., 31: 1039-1047.
CrossRef | Direct Link | Subramanian, M., M. Sakthivel, K. Sooryaprakash and R. Sudhakaran, 2013. Optimization of end mill tool geometry parameters for Al7075-T6 machining operations based on vibration amplitude by response surface methodology. Measurement, 46: 4005-4022.
CrossRef | Direct Link | Turner, S., D. Merdol, Y. Altintas and K. Ridgway, 2007. Modelling of the stability of variable helix end mills. Int. J. Mach. Tools Manuf., 47: 1410-1416.
CrossRef | Direct Link | Vagnorius, Z., M. Rausand and K. Sorby, 2010. Determining optimal replacement time for metal cutting tools. Eur. J. Oper. Res., 206: 407-416.
CrossRef | Zareena, A.R. and S.C. Veldhuis, 2012. Tool wear mechanisms and tool life enhancement in ultra-precision machining of titanium. J. Mater. Process. Technol., 212: 560-570.
CrossRef | Direct Link |