References

Abouzgia, M.B. and D.F. James, 1997. Temperature rise during drilling through bone. Int. J. Oral Maxillofac Implants, 12: 342-353.
PubMed  |  

Abouzgia, M.B. and J.M. Symington, 1996. Effect of drill speed on bone temperature. Int. J. Oral Maxillofacial. Surg., 25: 394-399.
PubMed  |  

Alam, K., A.V. Mitrofanov and V.V. Silberschmidt, 2011. Experimental investigations of forces and torque in conventional andultrasonically-assisted drilling of cortical bone. Med. Eng. Phys., 33: 234-239.
CrossRef  |  

Albrektsson, T., 1980. The healing of autogenous bone grafts after varying degrees of surgical trauma. J. Bone Joint Surg., 62: 403-410.
Direct Link  |  

Augustin, G., S. Davila, K. Mihoci, T. Udiljak, D.S. Vedrina and A. Antabak, 2008. Thermal osteonecrosis and bone drilling parameters revisited. Arch. Orthopaedic Trauma Surg., 128: 71-77.
PubMed  |  

Bachus, K.N., M.T. Rondina and D.T. Hutchinson, 2000. The effects of drilling force on cortical temperatures and their duration: An In vitro study. Med. Eng. Phys., 22: 685-691.
PubMed  |  

Benington, I.C., P.A. Biagionni, J. Briggs, S. Sheridan and P.J. Lamey, 2002. Thermal changes observed at implant sites during internal and external irrigation. Clin. Oral Impants Res., 13: 293-297.
CrossRef  |  

Branemark, P.I., R. Adell and U. Breine, 1969. Intra-osseous anchorage of dental prostheses. I. Experimental studies. Scand. J. Plast. Reconstr. Surg., 3: 81-100.
PubMed  |  

Cordioli, G. and Z. Majzoub, 1997. Heat generation during implant site preparation: An In vitro study. Int. J. Oral. Maxillofac Implants, 12: 186-193.
PubMed  |  

Da Silva, M.B. and J. Wallbank, 1999. Cutting temperature: Prediction and measurement methods-a review. J. Mater. Process. Technol., 88: 195-202.
CrossRef  |  Direct Link  |  

Da Silva, M.B. and J. Wallbank, 1999. Cutting temperature: Prediction and measurement methods-a review. J. Mater. Process. Technol., 88: 195-202.
CrossRef  |  Direct Link  |  

Davidson, S.R. and D.F. James, 2003. Drilling in bone: Modeling heat generation and temperature distribution. J. Biomechan. Eng., 125: 305-314.
PubMed  |  

Dudzinski, D., A. Devillez, A. Moufki, D. Larrouquere, V. Zerrouki and J. Vigneau, 2004. A review of developments towards dry and high speed machining of Inconel 718 alloy. Int. J. Mach. Tools Manuf., 44: 439-456.
CrossRef  |  Direct Link  |  

Eriksson, A.R. and T. Albrektsson, 1983. Temperature threshold levels for heat-induced bone tissue injury: A vital-microscopic study in the rabbit. J. Prosthet. Dent., 50: 101-107.
PubMed  |  

Eriksson, R.A. and R. Adell, 1986. Temperatures during for the placement of implants using the osseointegration technique. J. Oral Maxillofac Surg., 44: 4-7.
PubMed  |  

Eriksson, R.A. and T. Albrektsson, 1984. The effect of heat on bone regeneration: An experimental study in the rabbit using the bone growth chamber. Oral. Maxillofac. Surg., 42: 705-711.
PubMed  |  

Eriksson, R.A. and T. Albrektsson, 1984. The effect of heat on bone regeneration: An experimental study in the rabbit using the bone growth chamber. Oral. Maxillofac. Surg., 42: 705-711.
PubMed  |  

Eriksson, R.A., 1984. Heat induced bone tissue injury. PhD Thesis, University of Gothenburg, Sweden.

Esposito, M., J.M. Hirsch and U. Lekholm, 1998. Biological factors contributing to failures of osseointegrated oral implants. (I). Success criteria and epidemiology. Eur. J. Oral. Sci., 106: 527-551.
PubMed  |  

Esposito, M., J.M. Hirsch, U. Lekholm and P. Thomsen, 1998. Biological factors contributing to failures of osseointegrated oral implants. (II). Etiopathogenesis. Eur. J. Oral. Sci., 106: 721-764.
CrossRef  |  

Franssen, B.B., P.J. van Diest, A.H. Schuurman and M. Kon, 2008. Drilling kwires, what about the osteocytes? An experimental study in rabbits. Arch. Orthop. Trauma Surg., 128: 83-87.
PubMed  |  

Jianxin, D. and A. Xing, 1997. Wear behavior and mechanisms of aluminabased ceramic tools in machining of ferrous and non-ferrous alloys. Tribol. Int., 30: 807-813.
CrossRef  |  

Karaca, F., B. Aksakal and M. Kom, 2011. Influence of orthopaedic drilling parameters on temperature and histopathology of bovine tibia: An In vitro study. Med. Engin. Phys., 33: 1221-1227.
PubMed  |  

Karmani, S., 2006. The thermal properties of bone and the effects of surgical intervention. Curr. Orthopaedics, 20: 52-58.
CrossRef  |  

Krause, R.W., D.W. Bradbury, J.E. Kelly and E.M. Lunceford, 1982. Temperature elevations in orthopedic cutting operations. J. Biomech., 15: 267-269, 271-275.
CrossRef  |  

Lavelle, C. and D. Wedgwood, 1980. Effect of internal irrigation on frictional heat generated from bone drilling. J. Oral Surg., 38: 499-503.
PubMed  |  

Matthews, L.S. and C. Hirsch, 1972. Temperatures measured in human cortical bone when drilling. J. Bone Joint Surg., 54: 297-308.
Direct Link  |  

Mellinger, J.C., O.B. Ozdoganlar, R.E. Devor and S.G. Kapoor, 2003. Modeling chipevacuation forces in drilling for various flute geometries. J. Manuf. Sci. Eng., 125: 405-415.
Direct Link  |  

Misir, A.F., M. Sumer, M. Yenisey and E. Ergioglu, 2009. Effect of surgical drill guide on heat generated from implant drilling. J. Oral. Maxillofac Surg., 67: 2663-2668.
CrossRef  |  

Natali, C., P. Ingle and J. Dowell, 1996. Orthopaedic bone drills-can they be improved? Temperature changes near the drilling face. J. Bone Joint Surg., 78: 357-362.
Direct Link  |  

Obikawa, T., T. Matsumura, T. Shirakashi and E. Usui, 1997. Wear characteristic of alumina coated and alumina ceramic tools. J. Mater Process Technol., 63: 211-216.
CrossRef  |  

Obikawa, T., T. Matsumura, T. Shirakashi and E. Usui, 1997. Wear characteristic of alumina coated and alumina ceramic tools. J. Mater Process. Technol., 63: 211-216.
Direct Link  |  

Robertson, D.M. and D.C. Smith, 1978. Compressive strength of mandibular bone as a function of microstructure and strain rate. J. Biomech., 11: 455-471.
CrossRef  |  

Saha, S., S. Pal and J.A. Albright, 1982. Surgical drilling: Design and performance of an improved drill. J. Biomech. Eng., 104: 245-252.
PubMed  |  

Sener, B.C., G. Dergin, B. Gursoy, E. Kelesoglu and I. Slih, 2009. Effects of irrigation temperature on heat control in vitro at different drilling depths. Clin. Oral. Implants Res., 20: 294-298.
CrossRef  |  

Tehemar, S.H., 1999. Factors affecting heat generation during implant site preparation: A review of biologic observations and future considerations. Int. J. Oral Maxillofac Implants, 14: 127-136.
PubMed  |  

Toews, A.R., J.V. Bailey, H.G. Townsend and S.M. Barber, 1999. Effect of feed rate and drill speed on temperatures in equine cortical bone. Am. J. Vet. Res., 60: 942-944.
PubMed  |  

Yacker, M.J. and M. Klein, 1996. The effect of irrigation on osteotomy depth and bur diameter. Int. J. Oral. Maxillofac. Implants, 11: 634-638.
PubMed  |