References

Acarnley, P.P. and J.F. Watson, 2006. Review of position-sensorless operation of brushless permanent-magnet machines. IEEE. Trans. Ind. Electr., 53: 352-362.

Akin, B., U. Orguner, A. Ersak and M. Ehsani, 2006. Simple derivative-free nonlinear state observer for sensorless AC drives. IEEE/ASME Trans. Mechatronics, 11: 634-643.

Armstrong, G.J., D.J. Atkinson and P.P. Acarnley, 1997. A comparison of estimation techniques for sensorless vector controlled induction motor drives. Proc. IEEE. Int. Conf. Power Elect. Drive Syst., 1: 110-116.

Atkinson, D.J., P.P. Acarnley and J.W. Finch, 1991. Observers for induction motor state and parameter estimation. IEEE. Trans. Ind. Appl., 27: 1119-1127.

Barambones, O., A.J. Garrido and F.J. Maseda, 2007. Integral sliding-mode controller for induction motor based on field-oriented control theory. IET Control Theory Appl., 1: 786-794.
CrossRef  |  Direct Link  |  

Bhattacharya, T. and L. Umanand, 2006. Improved flux estimation and stator-resistance adaptation scheme for sensorless control of induction motor. IEE Proc. Electr. Power Appl., 153: 911-920.
Direct Link  |  

Blaschke, F., 1970. The principle of field orientation as applied to the new transvector closed loop control system for rotating field machines. Siemens Rev., 39: 217-220.

Bodson, M., J. Chiasson and R. Novotnak, 1998. High performance induction motor control via input-output linearization. IEEE Control Syst. Magazine, 14: 25-33.

Bonnet, F., P.E. Vidal and M. Pietrzak-David, 2007. Dual direct torque control of doubly fed induction machine. IEEE Trans. Ind. Electr., 54: 2482-2490.

Bose, B.K., 1986. Power Electronics and AC Drives. Prentice Hall, Englewood Cliffs, New Jeresy.

Bose, B.K., 2001. Modern Power Electronics and AC Drives. 1st Edn., Prentice Hall, New York, USA., ISBN-13: 978-0130167439, Pages: 736.

Buja, G.S. and M.P. Kazmierkowski, 2004. Direct torque control of PWM inverter-fed AC motors: A survey. IEEE Trans. Ind. Electron., 51: 744-757.
CrossRef  |  Direct Link  |  

Caruana, C., G.M. Asher and M. Sumner, 2006. Performance of HF signal injection techniques for zero-low-frequency vector control of induction machines under sensorless conditions. IEEE Trans. Ind. Electr., 53: 225-238.

Casadei, D., G. Serra, A. Stefani, A. Tani and L. Zarri, 2007. DTC drives for wide speed range applications using a robust flux-weakening algorithm. IEEE Trans. Ind. Electr., 54: 2451-2461.

Cirrincione, M., M. Pucci, G. Cirrincione and G.A. Capolino, 2006. An adaptive speed observer based on a new total least square neuron for induction machine drives. IEEE Trans. Ind. Appl., 42: 89-104.
CrossRef  |  Direct Link  |  

Depenbrock, M., 1988. Direct self control of inverter-fed induction machines. IEEE Trans. Power Electr., 3: 420-429.

Edelbaher, G., K. Jezernik and E. Urlep, 2006. Low-speed sensorless control of induction machine. IEEE Trans. Ind. Electr., 53: 120-129.

Grabowski, P.Z., M.P. Kazmierkowski, B.K. Bose and F. Blaabjerg, 2000. A simple direct-torque neuro-fuzzy control of PWM-inverter-fed induction motor drive. IEEE Trans. Ind. Electr., 47: 863-870.
CrossRef  |  

Hasse, K., 1972. Drehzahlgelverfahren fur schnelle umkeh-rantriebemit stromrichtergespeisten asynchron-kurzs-chlusslaufer-motoren. Reglungstechnik, 20: 60-66.

Holtz, J., 2002. Sensorless control of induction motor drives. Proc. IEEE, 90: 1359-1394.
CrossRef  |  

Holtz, J., 2006. Sensorless control of induction machines-with or without signal injection. IEEE Trans. Ind. Electr., 53: 7-30.

Kaboli, S., M.R. Zolghadri and E. Vahdati-Khajeh, 2007. A fast flux search controller for DTC-based induction motor drives. IEEE Trans. Ind. Electr., 54: 2407-2416.

Kadowaki, S., K. Ohishi, T. Hata, N. Iida, M. Takagi, T. Sano and S. Yasukawa, 2007. Antislip readhesion control based on speed-sensorless vector control and disturbance observer for electric commuter train-series 205-5000 of the East Japan Railway Company. IEEE Trans. Ind. Electr., 54: 2001-2008.

Kazmierkowski, M.P. and T. Orlowska-Kowalska, 2002. ANN Based Estimation and Control in Converter-fed Induction Motor Drives. In: Soft Computing in Industrial Electronics, Ovaska, S.J. and L. Sztandera (Eds.). Physica Verlag, Heidelberg, Germany, pp: 45-94.

Kazmierkowski, M.P., R. Krishnan and F. Blaabjerg, 2002. Control in Power Electronics. Academic Press, San Diego, CA.

Krishnamurthy, M., C.S. Edrington and B. Fahimi, 2006. Prediction of rotor position at standstill and rotating shaft conditions in switched reluctance machines. IEEE Trans. Power Electr., 21: 225-233.

Lascu, C., I. Boldea and F. Blaabjerg, 2005. Very-low-speed variable-structure control of sensorless induction machine drives without signal injection. IEEE Trans. Ind. Appl., 41: 591-598.

Marino, R., 1996. Output feedback control of current-fed induction motors with unknown rotor resistance. IEEE Trans. Control Syst. Technol., 4: 336-347.

Mecrow, B.C., J.W. Finch, E.A. El-Kharashi and A.G. Jack, 2002. Switchedreluctance motors with segmental rotors. IEE Proc. Electr. Power Appl., 149: 245-254.

Mir, S. and M.E. Elbuluk, 1995. Precision torque control in inverter-fed induction machines using fuzzy logic. Proceedings of the 26th Annual IEEE Power Electronics Specialists Conference, Jun. 18-22, Atlanta, GA., USA., pp: 396-401.

Mir, S., M.E. Elbuluk and D.S. Zinger, 1994. PI and fuzzy estimators for tuning the stator resistance in directtorque control of induction machines. Proceedings of the 25th Annual IEEE Power Electronics Specialists Conference, Jun. 20-25, Taipei, Taiwan, pp: 744-751.

Mir, S.A., D.S. Zinger and M.E. Elbuluk, 1994. Fuzzy controller for inverter fed induction machines. IEEE. Trans. Ind. Appl., 30: 78-84.

Mitronikas, E.D. and A.N. Safacas, 2005. An improved sensorless vector control method for an induction motor drive. IEEE Trans. Ind. Electr., 52: 1660-1668.

Ohtani, T., N. Takada and K. Tanaka, 1992. Vector control of induction motor without shaft encoder. IEEE Trans. Ind. Appl., 28: 157-164.
CrossRef  |  Direct Link  |  

Rashed, M., P.F.A. MacConnell, A.F. Stronach and P.P. Acarnley, 2007. Sensorless indirect-rotor-field-orientation speed control of a permanentmagnet synchronous motor with stator-resistance estimation. IEEE Trans. Ind. Electr., 54: 1664-1675.

Salo, M. and H. Tuusa, 2005. Vector-controlled PWM current-source-inverter-fed induction motor drive with a new stator current control method. IEEE Trans. Ind. Electr., 52: 523-531.
CrossRef  |  Direct Link  |  INSPEC

Schauder, C., 1992. Adaptive speed identification for vector control of induction motors without rotational transducers. IEEE Trans. Ind. Appl., 28: 1054-1061.
CrossRef  |  Direct Link  |  

Shi, D., P.J. Unsworth and R.X. Gao, 2006. Sensorless speed measurement of induction motor using Hilbert transform and interpolated fast Fourier transform. IEEE Trans. Instrum. Measur., 55: 290-299.

Sonnaillon, M.O., G. Bisheimer, C. De Angelo, J. Solsona and G.O. Garcia, 2006. Mechanical-sensorless induction motor drive based only on DC-link measurements. IEE Proc. Electr. Power Appl., 153: 815-822.

Takahashi, I. and T. Noguchi, 1986. A new quick-response and high efficiency control strategy of an induction machine. IEEE Trans. Ind. Appl., IA-22: 820-827.

Taylor, D.G., 1994. Nonlinear control of electric machines: An overview. IEEE Control Syst. Magazine, 14: 41-51.

Terzic, B. and M. Jadric, 2001. Design and implementation of the extended Kalman filter for the speed and rotor position estimation of brushless DC motor. IEEE. Trans. Ind. Electr., 48: 1065-1073.

Toliyat, H.A., E. Levi and M. Raina, 2003. A review of RFO induction motor parameter estimation techniques. IEEE Trans. Energy Convers., 18: 271-283.

Utkin, V.I., 1993. Sliding mode control design principles and applications to electric drives. IEEE Trans. Ind. Electron., 40: 23-36.
CrossRef  |  Direct Link  |  

Vas, P., 1998. Sensorless Vector and Direct Torque Control. Oxford University Press, London, UK.

Vas, P., 1999. Artificial-Intelligence-Based Electrical Machines and Drives. Oxford University Press, New York.

Wang, G., H.F. Hofmann and A. El-Antably, 2006. Speed-sensorless torque control of induction machine based on carrier signal injection and smooth-air-gap induction machine model. IEEE Trans. Energy Convers., 21: 699-707.

Xia, Y. and W. Oghanna, 1997. Fuzzy direct torque control of induction motor with stator flux estimation compensation. Proc. IEEE, 2: 505-510.

Xu, Z. and F. Rahman, 2007. An adaptive sliding stator flux observer for a direct-torque-controlled IPM synchronous motor drive. IEEE Trans. Ind. Electr., 54: 2398-2406.