References

Akers, R., 2002. Wave piercers and fast cats. Prof. Boatbuilders, 43: 54-67.

Baker, G.S., 1912. Some experiments in connection with the design of floats for hydro-aeroplanes. ARC (British) R and M, No. 70.

Blount, D.L. and R.J. Bartee, 1997. Design of propulsion system for high speed craft. Marine Technol., 34: 276-292.

Cheng, X. and J.F. Wellicome, 1994. Study of planing hydrodynamics sing strips of transversely variable pressure. J. Ship Res., 38: 30-41.

Cumberbatch, E., 1958. Two-dimensional Planing at froude number. J. Fluid Mechanics, 4: 466-478.

Doctors, L., 1975. Representation of three dimensional planing surfaces by finite elements. Proc. 1st Conf. Numerical Ship Hydrodynamics, 32: 517-537.

Korvin-Kroukovsky, B.B., D. Savitsky and W.F. Lehman, 1949. Wetted Area and Centre of Pressure of Planing Surfaces. Stevens Institute of Technology, Hoboken, New Jersey, USA.

Royce, R.A., 1994. A rational prismatic hull approach for planing hull analysis. Great Lakes and Great Rivers Section, SNAME, Cleveland, Ohio.

SNAME, 1957. Small Craft Data Sheets: Hard-Chine Boat. 74 Trinity Place, New York, pp: 1006.

Savitsky, D. and J.W. Neidinger, 1954. Wetted area and centre of pressure at planing surfaces at very low speed coefficients. Report July 1954, Davidson Laboratory, Stevens Institute of Technology. http://oai.dtic.mil/oai/oai?verb=getRecord&metadataPrefix=html&identifier=AD0052816.

Savitsky, D. and P.W. Brown, 1976. Procedure for hydrodynamic evaluationations of planing hulls in smooth and rough water. Mar. Technol., 13: 381-400.

Savitsky, D., 1964. Hydrodynamic design of planing hulls. Mar. Technol., 32: 78-88.

Scottorf, W., 1934. Experiments with planing surfaces. NACA TM 739 and NACA TM 661, 1932.

Shuford, C.L. Jr., 1958. A theoretical and experimental study of planing surfaces including effects of cross-section and plan form. NACA Report 1355.

Squire, H.B., 1957. The motion of a simple wedge along the water surface. Proc. Royal Soc. London, 243: 48-64.

Tong, J., C.K. Lee and S.C. Wong, 1989. A finite element approach to planing problem. Int. J. Num. Methods Eng., 43: 1253-1273.

Tuck, F.O., 1975. Low aspect ratio flat ship theory. J. Hydrod., 9: 3-12.
CrossRef  |  

Vorus, W., 1993. Hydrodynamic impact and penetration of flat cylinders. J. Eng. Maths, Vol. 48.

Wagner, H., 1967. Uber stoss-und gleitvorgange an der oberflanche von flussigkeitenZeitschrift fur. Angewandle Mechanik, 12: 822-825.

Wang, D.P. and P. Rispen, 1971. Three dimensional planing at high froude number. J. Ship Res., 15: 221-230.