Journal of Engineering and Applied Sciences
Year:
2010
Volume:
5
Issue:
6
Page No.
388 - 393
References
Bernstock-Kopaczynska, E. I. Bednarczyk, M. Jablonska, G. Niewielski and D. Kuc, 2008. The influence of thermo-mechanical treatment on the structure and plasticity of FeAl intermetallic phase-base alloy. Arch. Civil Mech. Eng., 8: 15-22.
Direct Link | Cho, S.H. and Y.C. Yoo, 2001. Metadynamic recrystallization of austenitic stainless steel. J. Mater. Sci., 36: 4279-4284.
Humphreys, F.J. and M. Hatherly, 1995. Recrystallization and Related Annealing Phenomena. 1st Edn., Pergamon Press, London, pp: 369-370.
Kim, S.I. and Y.C. Yoo, 2001. Dynamic recrystallization behavior of AISI 304 stainless steel. Mater. Sci. Eng. A, 311: 108-113.
Mataya, M.C., E.R. Nilsson, E.L. Brown and G. Krauss, 2003. Hot working and recrystallization of As-cast 316L. Metall. Mater. Trans. A, 34A: 1683-1703.
Momeni, A., K. Dehghani, H. Keshmiri and G.R. Ebrahimi, 2010. Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel. J. Mater. Sci. Eng. A, 527: 1605-1611.
CrossRef | Najafizadeh, A., J.J. Jonas, G.R. Stewart and E.I. Poliak, 2006. The strain dependence of post-dynamic recrystallization in 304 H stainless steel. Metall. Mater. Trans. A, 37: 1899-1906.
Niewielski, G., K. Radwanski and D. Kuc, 2007. The influence of hot-working processing on plasticity and structure of duplex steel. Arch. Mater. Sci. Eng., 28: 325-332.
Rodriguez-Ibabe, J.M., I. Gutierrez, B. Lopez and A. Iza-Mendia, 2005. Microalloying for new steel processes and applications. Mater. Sci. Forum, Vol. 500-501.
Schmitz, A., J. Neutjens, J.C. Herman and V. Leroy, 1998. New thermomechanical hot rolling schedule for the processing of high strength fine grained multiphase steels. Proc. Conf. Mechanical Work. Steel Process., 36: 295-310.
Direct Link | Yada, H., C.M. Li and H. Yamagata, 2000. Dynamic γ→α transformation during hot deformation in Iron-Nickel-Carbon alloys. ISIJ. Int., 40: 200-206.