References

Benard, Q., M. Fois, M. Grisel and P. Laurens, 2005. Surface treatment of carbon/epoxy and glass/epoxy composites with an excimer laser beam. Int. J. Adhesion Adhesive, 26: 543-549.
CrossRef  |  

Boszer, S.M. and B.G. Palm, 1997. Method of curing composite articles using conformal vacuum bag. Free Patent Online US005624512.

Chen, R. and X. Li, 1993. A study of silica coating on the surface of carbon or graphite fiber and the interface in a carbon/magnesium composite. J. Composites Sci. Technol., 49: 357-362.
CrossRef  |  

Diaz, J. and L. Rubio, 2003. Developments to manufacture structural aeronautical parts in carbon fibre reinforced thermoplastic materials. J. Materials Process. Technol., 143-144: 342-346.
CrossRef  |  

Fu, S.Y., Z.K. Chen, S. Hong and C.C. Han, 2009. The reduction of carbon nanotube (CNT) length during the manufacture of CNT/polymer composites and a method to simultaneously determine the resulting CNT and interfacial strengths. Carbon, 47: 3192-3200.
CrossRef  |  Direct Link  |  

Goren, A. and C. Atas, 2008. Manufacturing of polymer matrix composites using vacuum assisted resin infusion molding. Int. Sci. J., 34: 117-120.
Direct Link  |  

Guo, H., Y. Huang, L. Liu and X. Shi, 2010. Effect of epoxy coatings on carbon fibers during manufacture of carbon fiber reinforced resin matrix composites. Material Design, 31: 1186-1190.
CrossRef  |  

Guru, M., M. Atar and R. Yildirim, 2006. Production of polymer matrix composite particleboard from walnut shell and improvement of its requirements. Mater. Design, 29: 284-287.
CrossRef  |  

Guru, M., S. Tekeli and E. Akin, 2007. Manufacturing of polymer matrix composite using marble dust and fly ash. Key Eng. Mater., 336-338: 1353-1356.
Direct Link  |  

Hinea, P.J., N. Davidsonb and R.A. Ducketta, 1995. Measuring the fibre orientation and modelling the elastic properties of injection-moulded long-glass-fibre-reinforced nylon. Compos. Sci. Technol., 53: 125-131.
CrossRef  |  

Hou, M., L. Ye, H.J. Lee and Y.W. Mai, 1996. Manufacture of a carbon-fabric-reinforced polyetherimide (CF/PEI) composite material. Compos. Sci. Technol., 58: 182-190.
CrossRef  |  

Hsiao, K.T., M. Devillard and S.G. Advani, 2004. Simulation based flow distribution network optimization for vacuum assisted resin transfer moulding process. J. Model. Simulation Mater. Sci. Eng., 12: S175-S190.
CrossRef  |  

Jiang, L., H. Tan, J. Wu, Y. Huang and K.C. Hwang, 2007. Review the recent progress to model the CNT/matrix interfaces. J. Nano, 2: 139-148.

Mosleh, M., N.P. Suh and J. Arinez, 1997. Manufacture and properties of a polyethylene homocomposite. Compos. Part A: Applied Sci. Manufact., 29: 611-617.
CrossRef  |  

Qiu, Y., W. Xu, Y. Wang, M.A. Zikry and M.H. Mohamed, 2001. Fabrication and characterization of the three-dimensional cellular-matrix composites reinforced with woven carbon fabric. Compos. Sci. Technol., 61: 2425-2435.
CrossRef  |  

Rachal, D.M. and R.K. James, 1990. Vacuum bagging process for fiber reinforced thermoplastic. Phillips Petroleum Company, Okla. Free patent online US004915896.

Sandler, J., P. Werner, M.S.P. Shaffer, V. Demchuk, V. Altstadt and A.H. Windle, 2002. Production of poly(ether ether ketone) nanocomposites containing vapour-grown carbon nanofibres(CNF) using standard polymer processing techniques. Compos. Part A Applied Sci. Manufact., 33: 1033-1039.

Tuckera, D.J.N., G.F. Smitha and S.S.F. Wong, 2003. Introduction of method of curing process outside die in pultrusion process. J. Material process. Technol., 138: 311-315.

Vodermayer, A.M., J.C. Kaerger and G. Hinrichsen, 1993. Manufacture of high performanc fibre-reinforced thermoplastics by aqueous powder impregnation. Compos. Manufact., 4: 123-132.
CrossRef  |  

Wang, H., H. Zhang, W. Zhao, W. Zhang and G. Chen, 2008. Preparation of polymer/oriented graphite nanosheet composite by electric field-inducement. J. Compos. Sci. Technol., 68: 238-243.
CrossRef  |  

Yumitori, S., D. Wang and F.R. Jones, 1994. The role of sizing resins in carbon fibre-reinforced polyethersulfone (PES). Composite, 25: 698-705.
CrossRef  |