References

Banu, A., M.Y. Ali and M.A. Rahman, 2014. Micro-electro discharge machining of non-conductive zirconia ceramic: Investigation of MRR and recast layer hardness. Intl. J. Adv. Manuf. Technol., 75: 257-267.
CrossRef  |  Direct Link  |  

Chevalier, J. and L. Gremillard, 2009. Ceramics for medical applications: A picture for the next 20 years. J. Eur. Ceramics Soc., 29: 1245-1255.
CrossRef  |  Direct Link  |  

Das, S. and S.S. Joshi, 2010. Modeling of spark erosion rate in microwire-EDM. Intl. J. Adv. Manuf. Technol., 48: 581-596.
CrossRef  |  Direct Link  |  

Fukuzawa, Y., N. Mohri, H. Gotoh and T.A.N.I. Takayuki, 2009. Three-dimensional machining of insulating ceramics materials with electrical discharge machining. Trans. Nonferrous Met. Soc. China, 19: 150-156.
CrossRef  |  Direct Link  |  

Fukuzawa, Y., N. Mohri, T. Tani and A. Muttamara, 2004. Electrical discharge machining properties of noble crystals. J. Mater. Process. Technol., 149: 393-397.
Direct Link  |  

Furutani, K., A. Saneto, H. Takezawa, N. Mohri and H. Miyake, 2001. Accertation of titanium carbide by electrical discharge machining with powder suspended in working fluid. Precision Eng., 25: 138-144.

Ji, R., Y. Liu, Y. Zhang, F. Wang and B. Cai et al., 2012. Single discharge machining insulating Al2O3 ceramic with high instantaneous pulse energy in kerosene. Mater. Manuf. Processes, 27: 676-682.
Direct Link  |  

Kansal, H.K., S. Singh and P. Kumar, 2007. Technology and research developments in Powder Mixed Electric Discharge Machining (PMEDM). J. Mater. Process. Technol., 184: 32-41.
Direct Link  |  

Masuzawa, T., 2000. State of the art of micromachining. CIRP Ann. Manuf. Technol., 49: 473-488.
CrossRef  |  

Mohri, N., Y. Fukuzawa, T. Tani, N. Saito and K. Furutani, 1996. Assisting electrode method for machining insulating ceramics. CIRP Ann. Manufactur. Technol., 45: 201-204.
CrossRef  |  Direct Link  |  

Mohri, N., Y. Fukusima, Y. Fukuzawa, T. Tani and N. Saito, 2003. Layer generation process on work-piece in electrical discharge machining. CIRP. Ann. Manuf. Technol., 52: 157-160.
Direct Link  |  

Muttamara, A., Y. Fukuzawa, N. Mohri and T. Tani, 2009. Effect of electrode material on electrical discharge machining of alumina. J. Mater. Process. Technol., 209: 2545-2552.
Direct Link  |  

Schubert, A., H. Zeidler, M.H. Oschatzchen, J. Schneider and M. Hahn, 2013. Enhancing micro-EDM using ultrasonic vibration and approaches for machining of nonconducting ceramics. Strojniski Vestnik J. Mech. Eng., 59: 156-164.
Direct Link  |  

Schubert, A., H. Ziedler, N. Wolf and M. Hackert, 2011. Micro electro discharge machining of electrically nonconductive ceramics. AIP. Conf. Proc., 1353: 1303-1308.

Ting, H.T., K.A.A. Hossein and H.B. Chua, 2009. Review of micromachining of ceramics by etching. Trans. Nonferrous Met. Soc. China, 19: 1-16.
CrossRef  |  Direct Link  |  

Zarepour, H., A.F. Tehrani, D. Karimi and S. Amini, 2007. Statistical analysis on electrode wear in EDM of tool steel DIN 1.2714 used in forging dies. J. Mater. Process. Technol., 187: 711-714.
Direct Link  |