References

Abraham, R.R., A. Andhare and N.K. Sahu, 2017. Performance of multi walled carbon nano tube based nanofluid in turning operation. Mater. Manuf. Processes, 1: 1-7.
Direct Link  |  

Amrita, M., R.R. Srikant and A.V. Sitaramaraju, 2014. Performance evaluation of nanographite-based cutting fluid in machining process. Mater. Manuf. Processes, 29: 600-605.
Direct Link  |  

Hoffmeister, B., 1970. [On Wear on the Hob]. RWTH Aachen University, Aachen, Germany, (in German).

Khalil, A.N.M., M.A.M. Ali and A.I. Azmi, 2015. Effect of Al₂O₃ nanolubricant with SDBS on tool wear during turning process of AISI 1050 with minimal quantity lubricant. Procedia Manuf., 2: 130-134.
Direct Link  |  

Khalilpourazary, S. and S.S. Meshkat, 2014. Investigation of the effects of alumina nanoparticles on spur gear surface roughness and hob tool wear in hobbing process. Intl. J. Adv. Manuf. Technol., 71: 1599-1610.
CrossRef  |  Direct Link  |  

Rech, J., 2006. Influence of cutting edge preparation on the wear resistance in high speed dry gear hobbing. Wear, 261: 505-512.
Direct Link  |  

Roy, R.K., 1990. A Primer on The Taguchi Method. Van Nostrand Reinhold, New York, USA., ISBN: 13-9780442237295, Pages: 247.

Sarhan, A.A., M. Sayuti and M. Hamdi, 2012. Reduction of power and lubricant oil consumption in milling process using a new SiO₂ nanolubrication system. Intl. J. Adv. Manuf. Technol., 63: 505-512.
CrossRef  |  Direct Link  |  

Stein, S., M. Lechthaler, S. Krassnitzer, K. Albrecht and A. Schindler et al., 2012. Gear hobbing: A contribution to analogy testing and its wear mechanisms. Procedia CIRP., 1: 220-225.
Direct Link  |  

Umezaki, Y., F. Yoshiyuki, K. Syuhei, O. Osamu and Toshiro, 2012. Wear resistance of coating films on hob teeth (Intermittent Cutting Tests with a Flytool). J. Adv. Mech. Des., 6: 206-221.

Vasu, V. and K.R.G. Pradeep, 2011. Effect of minimum quantity lubrication with Al2O3 nanoparticles on surface roughness, tool wear and temperature dissipation in machining Inconel 600 alloy. Proc. Inst. Mech. Eng. J. Nanoengineering Nanosystems, 225: 3-16.
Direct Link  |