References

Akhlaghi, F. and A. Zare-Bidaki, 2009. Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024-graphite composites produced by in situ powder metallurgy method. Wear, 266: 37-45.
Direct Link  |  

Balci, O., D. Agaogullari, H. Gokce, I. Duman and M.L. Ovecoglu, 2014. Influence of TiB₂ particle size on the microstructure and properties of Al matrix composites prepared via mechanical alloying and pressureless sintering. J. Alloys Compd., 586: S78-S84.
Direct Link  |  

Baradeswaran, A. and A.E. Perumal, 2014. Study on mechanical and wear properties of Al₇₀₇₅/Al₂O₃-graphite hybrid composites. Compos. Part B Eng., 56: 464-471.
Direct Link  |  

Barekar, N., S. Tzamtzis, B.K. Dhindaw, J. Patel and N.H. Babu et al., 2009. Processing of aluminum-graphite particulate metal matrix composites by advanced shear technology. J. Mater. Eng. Perform., 18: 1230-1240.
Direct Link  |  

Deaquino-Lara, R., E. Gutierrez-Castaneda, I. Estrada-Guel, G. Hinojosa-Ruiz and E. Garcia-Sanchez et al., 2014. Structural characterization of Aluminium alloy 7075-graphite composites fabricated by mechanical alloying and hot extrusion. Mater. Des., 53: 1104-1111.
Direct Link  |  

Hashim, J., 2001. The production of cast metal matrix composite by a modified stir casting method. J. Teknologi, 35: 9-20.
Direct Link  |  

Hashim, J., L. Looney and M.S.J. Hashmi, 2002. Particle distribution in cast metal matrix composites-part I. J. Mater. Process. Technol., 123: 251-257.
Direct Link  |  

Hassan, A.M., G.M. Tashtoush and J.A. Al-Khalil, 2007. Effect of graphite and/or silicon carbide particles addition on the hardness and surface roughness of Al-4 wt% Mg alloy. J. Compos. Mater., 41: 453-465.
Direct Link  |  

Jayaprakash, R.H., A. Budan and J. Hemanth, 2014. Preparation and investigation on properties of cryogenically solidified nano metal matrix composites. Intl. J. Eng. Res. Appl., 4: 74-79.
Direct Link  |  

Khosravi, H., H. Bakhshi and E. Salahinejad, 2014. Effects of compocasting process parameters on microstructural characteristics and tensile properties of A356-SiCp composites. Trans. Nonferrous Met. Soc. China, 24: 2482-2488.
Direct Link  |  

Krishnan, B.P., N. Raman, K. Narayanaswamy and P.K. Rohatgi, 1983. Performance of Aluminum alloy graphite bearings in a diesel engine. Tribol. Intl., 16: 239-244.
Direct Link  |  

Kumar, A., M.M. Mahapatra and P.K. Jha, 2012. Fabrication and characterizations of mechanical properties of Al-4.5%Cu/10TiC composite by in-situ method. J. Miner. Mater. Charact. Eng., 11: 1075-1080.
CrossRef  |  Direct Link  |  

Lakshmi, S., L. Lu and M. Gupta, 1998. In situ preparation of TiB₂ reinforced Al based composites. J. Mater. Process. Technol., 73: 160-166.
Direct Link  |  

Liu, Z., G. Zu, H. Luo, Y. Liu and G. Yao, 2010. Influence of Mg addition on graphite particle distribution in the Al alloy matrix composites. J. Mater. Sci. Technol., 26: 244-250.
Direct Link  |  

Mallikarjuna, C., S.M. Shashidhara, U.S. Mallik and K.I. Parashivamurthy, 2011. Grain refinement and wear properties evaluation of Aluminum alloy 2014 matrix-TiB 2 in-situ composites. Mater. Des., 32: 3554-3559.
Direct Link  |  

Natarajan, S., R. Narayanasamy, S.K. Babu, G. Dinesh and B.A. Kumar et al., 2009. Sliding wear behaviour of Al 6063/TiB 2 in situ composites at elevated temperatures. Mater. Des., 30: 2521-2531.
Direct Link  |  

Rajan, H.B.M., S. Ramabalan, I. Dinaharan and S.J. Vijay, 2013. Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites. Mater. Des., 44: 438-445.
CrossRef  |  

Ramesh, A., J.N. Prakash, A.S.S. Gowda and S. Appaiah, 2009. Comparison of the mechanical properties of AL6061/Albite and AL6061/graphite metal matrix composites. J. Miner. Mater. Charact. Eng., 8: 93-106.
CrossRef  |  Direct Link  |  

Ramesh, C.S., A. Ahamed, B.H. Channabasappa and R. Keshavamurthy, 2010. Development of Al₆₀₆₃-TiB₂ in situ composites. Mater. Des., 31: 2230-2236.
Direct Link  |  

Ramesh, C.S., S. Pramod and R. Keshavamurthy, 2011. A study on microstructure and mechanical properties of Al₆₀₆₁-TiB₂ in-situ composites. Mater. Sci. Eng. A, 528: 4125-4132.
Direct Link  |  

Ravindran, P., K. Manisekar, P. Narayanasamy, N. Selvakumar and R. Narayanasamy, 2012. Application of factorial techniques to study the wear of Al hybrid composites with graphite addition. Mater. Des., 39: 42-54.
Direct Link  |  

Sahin, Y. and M. Acilar, 2003. Production and properties of SiCp-reinforced Aluminium alloy composites. Compos. Part A Appl. Sci. Manuf., 34: 709-718.
Direct Link  |  

Selvam, J.D.R., D.R. Smart and I. Dinaharan, 2013. Microstructure and some mechanical properties of fly ash particulate reinforced AA₆₀₆₁ aluminum alloy composites prepared by compocasting. Mater. Des., 49: 28-34.
Direct Link  |  

Suresh, S. and N.S.V. Moorthi, 2013. Process development in stir casting and investigation on microstructures and wear behavior of TiB2 on Al6061 MMC. Procedia Eng., 64: 1183-1190.
Direct Link  |  

Tjong, S.C. and K.F. Tam, 2006. Mechanical and thermal expansion behavior of hipped aluminum-TiB₂ composites. Mater. Chem. Phys., 97: 91-97.
Direct Link  |  

Vettivel, S.C., N. Selvakumar, N. Leema and A.H. Lenin, 2014. Electrical resistivity, wear map and modeling of extruded tungsten reinforced copper composite. Mater. Des., 56: 791-806.
CrossRef  |  Direct Link  |  

Vogelsang, M., R.J. Arsenault and R.M. Fisher, 1986. Anin situ HVEM study of dislocation generation at Al-SiC interfaces in metal matrix composites. Metall. Mater. Trans. A, 17: 379-389.
Direct Link  |  

Wang, D.Z., H.X. Peng, J. Liu and C.K. Yao, 1995. Wear behaviour and microstructural changes of SiCw-Al composite under unlubricated sliding friction. Wear, 184: 187-192.
Direct Link  |