References

Alabuzhev, P.A., L. Gritchin, L. Kim, G. Migirenk and V. Chon et al., 1989. Vibration Protecting and Measuring Systems with Quasi-Zero Stiffness. Hemisphere Publishing, New York, USA., ISBN:0-89116-811-7, Pages: 97.

Carrella, A. and M.I. Friswell, 2008. A passive vibration isolator incorporating a composite bistable plate. Proceedings of the 6th European Conference on Nonlinear Dynamics, June 30-July 4, 2008, IPACS Electronic library, Saint Petersburg, Russia, pp: 1-4.

Carrella, A., M. Brennan and T.P. Waters, 2007. Optimization of a quasi-zero-stiffness isolator. J. Mech. Sci. Technol., 21: 946-949.
Direct Link  |  

Carrella, A., M. Brennan and T.P. Waters, 2007. Static analysis for a passive vibration isolator with quasi-zero stiffness characteristic. J. Sound Vibr., 301: 678-689.
Direct Link  |  

Le, T.D. and K.K. Ahn, 2011. A vibration isolation system in low frequency excitation region using negative stiffness structure for vehicle seat. J. Sound Vibr., 330: 6311-6335.
Direct Link  |  

Le, T.D. and K.K. Ahn, 2012. Fuzzy sliding mode controller of a pneumatic active isolating system using negative stiffness structure.. Mech. Sci. Technol., 26: 3873-3884.
Direct Link  |  

Maciejewski, I., L. Meyer and T. Krzyzynski, 2009. Modelling and multi-criteria optimization of passive seat suspension vibroisolating properties. J. Sound Vibr., 324: 520-538.
Direct Link  |  

Muminovic, A.J., S. Braut and N. Repcic, 2013. Elastic rotor control using active magnetic bearing system. Proceedings of the 17th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, September 10-11, 2013, TMT Publication, Istanbul, Turkey, pp: 465-468.

Six, M.F., R.L. Letty, R. Seiler and P. Coste, 2005. Design and testing of piezo motors for non-magnetic and/or fine positioning applications. Proceedings of the 11th Symposium on European Space Mechanisms and Tribology ESMAT Vol. 591, September 21-23, 2005, ESA Publication, Noordwijk, Netherlands, pp: 311-316.

Stephen, T. and D.H. Young, 1955. Vibration Problems in Engineering. D. Van Nostrand Publisher, New York, USA.,.

Sun, X., J. Xu, X. Jing and L. Cheng, 2014. Beneficial performance of a quasi-zero-stiffness vibration isolator with time-delayed active control. Int. J. Mech. Sci., 82: 32-40.
CrossRef  |  Direct Link  |  

Sun, X., J. Xu, X. Jing and L. Cheng, 2014. Beneficial performance of a quasi-zero-stiffness vibration isolator with time-delayed active control. Int. J. Mech. Sci., 82: 32-40.
CrossRef  |  Direct Link  |  

Valeev, A., A. Zotov and S. Kharisov, 2015. Designing of compact low frequency vibration isolator with quasi-zero-stiffness. J. Low Freq. Noise Vibr. Act. Control, 34: 459-473.
Direct Link  |  

Valeev, A.R. and S.A. Kharisov, 2016. Application of vibration isolators with a low stiffness for the strongly vibrating equipment. Procedia Eng., 150: 641-646.
Direct Link  |  

Valeev, A.R., A.N. Zotov and T.A. Yu, 2010. Vibrated insulating suspension with quasi-zero-stiffness. Prob. Collecting Preparing Transporting Oil Prod., 3: 78-84.
Direct Link  |  

Yang, Y.N. and W.H. Chieng, 1997. An elastic suspension design framework for tuned gyroscopes. J. Mech. Des., 119: 81-87.
CrossRef  |  Direct Link  |