References

Agnello, F. and M. Lo Brutto, 2007. Integrated surveying techniques in cultural heritage documentation. Proceedings of the 2007 Conference on International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, July 12, 2007, International Society for Photogrammetry and Remote Sensing (ISPRS), Zurich, Switzerland, pp: 47-52.

Blais, F., 2004. A review of 20 years of range sensors development. J. Electron. Imaging, 13: 231-240.
Direct Link  |  

Brewer, T., 1994. Understanding Boat Design. 4th Edn., International Marine Publishing Company, Camden, Maine,.

Cappello, F., T. Ingrassia, A. Mancuso and V. Nigrelli, 2005. Methodical redesign of a semitrailer. WIT. Trans. Built Environ., 80: 359-369.
CrossRef  |  Direct Link  |  

Cuesta, E., B.J. Alvarez, F. Sanchez-Lasheras, R.I. Fernandez and D. Gonzalez-Madruga, 2012. Feasibility evaluation of photogrammetry versus coordinate measuring arms for the assembly of welded structures. Adv. Mater. Res., 498: 103-108.
Direct Link  |  

Di Paola, F., P. Pedone, L. Inzerillo and C. Santagati, 2015. Anamorphic projection: Analogical/digital algorithms. Nexus Netw. J., 17: 253-285.
Direct Link  |  

Fryer, J., H. Mitchell and J.H. Chandler, 2007. Applications of 3D Measurement from Images. Whittles Publishing, Scotland, UK., ISBN:9781870325691, Pages: 304.

Guidi, G., L.L. Micoli and M. Russo, 2005. Boat's hull modeling with low-cost triangulation scanners. Proceedings of the 2005 International Conference on Videometrics VIII Vol. 5665, January 17, 2005, International Society for Optics and Photonics, San Jose, California, USA., pp: 28-39.

Ingrassia, T. and A. Mancuso, 2013. Virtual prototyping of a new intramedullary nail for tibial fractures. Intl. J. Interact. Des. Manuf., 7: 159-169.
Direct Link  |  

Ingrassia, T., A. Mancuso, V. Nigrelli and D. Tumino, 2014. Numerical study of the components positioning influence on the stability of a reverse shoulder prosthesis. Intl. J. Interact. Des. Manuf., 8: 187-197.
Direct Link  |  

Ingrassia, T., A. Mancuso, V. Nigrelli and D. Tumino, 2017. A multi-technique simultaneous approach for the design of a sailing yacht. Intl. J. Interact. Des. Manuf., 11: 19-30.
Direct Link  |  

Koelman, H.J., 2010. Application of a photogrammetry-based system to measure and re-engineer ship hulls and ship parts: An industrial practices-based report. Comput. Aided Des., 42: 731-743.
Direct Link  |  

Remondino, F. and S. El‐Hakim, 2006. Image‐based 3D modelling: A review. Photogramm. Rec., 21: 269-291.
Direct Link  |  

Robson, S. and M. Shortis, 2007. Engineering and Manufacturing. In: Applications of 3D Measurement from Images, Fryer, J., H. Mitchell and J. Chandler (Eds.). Whittles Publishing, Scotland, UK., pp: 65-101.

Santagati, C., L. Inzerillo and F. Di Paola, 2013. Image-based modeling techniques for architectural heritage 3D digitalization: Limits and potentialities. Proceedings of the 24th International CIPA Symposium on International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, September 2-6, 2013, CIPA, Strasbourg, France, pp: 555-560.

Skarlatos D. and S. Kiparissi, 2012. Comparison, laser scanning, image based modelling, open source, accuracy, 3D reconstruction. Proc. ISPRS Ann. Protogrammetry Remote Sensingpp, 1: 1-6.

Tedeschi, A., 2014. AAD Algorithms-Aided Design: Parametric Strategies Using Grasshopper. Le Penseur Publisher, Potenza, Italy, ISBN:9788895315300, Pages: 495.

Wang, C., 2011. Laser Scanning, Theory and Applications. InTech Open Access Publisher, London, England, UK.,.