References

Anonymous, 2000. Standard test method for conducting erosion tests by solid particle impingement using gas jets. ASTM International G76-95, West Conshohocken, Pennsylvania, USA.

Anonymous, 2010. Standard test method for liquid impingement erosion using rotating apparatus. ASTM International G73, West Conshohocken, Pennsylvania, USA.

Durman, R.W., 1988. Progress in abrasion-resistant materials for use in comminution processes. Intl. J. Min. Process., 22: 381-399.
CrossRef  |  

Hann, S.K. and J.D. Gates, 1997. A transformation toughening white cast Iron. J. Mater. Sci., 32: 1249-1259.
CrossRef  |  

Higuera-Cobos, O.F., F.D. Dumitru and D.H. Mesa-Grajales, 2016. Improvement of abrasive wear resistance of the high chromium cast Iron ASTM A-532 through thermal treatment cycles. Faculty Eng., 25: 93-103.
CrossRef  |  

Imurai, S., C. Thanachayanont, J.T.H. Pearce, K. Tsuda and T. Chairuangsri, 2015. Effects of W on microstructure of as-cast 28wt.% Cr-2.6 wt.% C-(0-10) wt.% W irons. Mater. Charact., 99: 52-60.
Direct Link  |  

Inthidech, S., P. Sricharoenchai and Y. Matsubara, 2006. Effect of alloying elements on heat treatment behavior of hypoeutectic high chromium cast Iron. Mater. Trans., 47: 72-81.
CrossRef  |  

Karantzalis, E., A. Lekatou and H. Mavros, 2009. Microstructure and properties of high chromium cast irons: Effect of heat treatments and alloying additions. Intl. J. Cast Met. Res., 22: 448-456.
CrossRef  |  

Laird, G., R. Gundlach and K. Rohrig, 2000. Abrasion-Resistant Cast Iron Handbook. American Foundry Society, Schaumburg, Illinois, USA., ISBN:9780874332247, Pages: 222.

Llwellyn, R.J., S.K. Yick and K.F. Dolman, 2004. Scouring erosion resistance of metallic materials used in slurry pump service. Wear, 256: 592-599.
Direct Link  |  

Pearce, J.T.H., 2002. High chromium cast irons to resist abrasive wear. Foundryman, 95: 156-166.
Direct Link  |  

Poolthong, N., H. Nomura and M. Takita, 2004. Effect of heat treatment on microstructure and properties of semi-solid chromium cast Iron. Mater. Trans., 45: 880-887.
Direct Link  |  

Stachowiak, G.B. and G.W. Stachowiak, 2004. Wear mechanisms in ball-cratering tests with large abrasive particles. Wear, 256: 600-607.
CrossRef  |  

Tabrett, C.P., I.R. Sare and M.R. Ghomashchi, 1996. Microstructure-property relationships in high chromium white Iron alloys. Intl. Mater. Rev., 41: 59-82.
CrossRef  |  

Wiengmoon, A., J.T.H. Pearce and T. Chairuangsri, 2011. Relationship between microstructure, hardness and corrosion resistance in 20wt.% Cr, 27wt.% Cr and 36wt.% Cr high chromium cast irons. Mater. Chem. Phys., 125: 739-748.
Direct Link  |  

Wiengmoon, A., T. Chairuangsri and J.T. Pearce, 2015. Effects of destabilisation heat treatment on microstructure, hardness and corrosion behaviour of 18wt.% Cr and 25wt.% Cr cast irons. Key Eng. Mater., 658: 76-80.
CrossRef  |  Direct Link  |  

Xiaofeng, X., Y. Shengping, Y. Weixin, Z. Xiaoguang and X. Qiong, 2012. High Cr white cast iron/carbon steel bimetal liner by lost foam casting with liquid-liquid composite process. China Foundry, 9: 136-142.
Direct Link  |  

Yan, P. and Q. Zhou, 1987. The influence of boron on the abrasion wear resistance of 17% Cr white cast Iron. Proceedings of the International Conference on Wear of Materials, April 5-9, 1987, ASME, New York, USA., pp: 743-752.

Zeytin, H.K., H. Yildirim, B. Berme, S. Duduoglu and G. Kazdal et al., 2011. Effect of boron and heat treatment on mechanical properties of white cast Iron for mining application. J. Iron Steel Res. Intl., 18: 31-39.
CrossRef  |