References

Alshmri, F., H.V. Atkinson, S.V. Hainsworth, C. Haidon and S.D.A. Lawes, 2014. Dry sliding wear of Aluminium-high silicon hypereutectic alloys. Wear, 313: 106-116.
Direct Link  |  

Bisadi, H. and A. Abasi, 2011. Fabrication of Al7075/TiB₂ surface composite via friction stir processing. Am. J. Mater. Sci., 1: 67-70.
CrossRef  |  Direct Link  |  

Chen, C.F., P.W. Kao, L. Chang and N.J. Ho, 2010. Mechanical properties of nanometric Al₂O₃ particulate-reinforced Al-Al₁₁Ce₃ composites produced by friction stir processing. Mater. Trans., 51: 933-938.
Direct Link  |  

Devaraju, A., A. Kumar, A. Kumaraswamy and B. Kotiveerachari, 2013. Influence of reinforcements (SiC and Al₂O₃) and rotational speed on wear and mechanical properties of Aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing. Mater. Des., 51: 331-341.
Direct Link  |  

Dixit, M., J.W. Newkirk and R.S. Mishra, 2007. Properties of friction stir-processed Al 1100-NiTi composite. Scr. Mater., 56: 541-544.
Direct Link  |  

Kala, H., K.K.S. Mer and S. Kumar, 2014. A review on mechanical and tribological behaviors of stir cast Aluminum matrix composites. Procedia Mater. Sci., 6: 1951-1960.
Direct Link  |  

Kumar, A., M.M. Mahapatra, P.K. Jha, N.R. Mandal and V. Devuri, 2014. Influence of tool geometries and process variables on friction stir butt welding of Al-4.5% Cu/TiC in situ metal matrix composites. Mater. Des., 59: 406-414.
Direct Link  |  

Leon-Patino, C.A., E.A. Aguilar-Reyes, E. Bedolla-Becerril, A. Bedolla-Jacuinde and S. Mendez-Diaz, 2013. Dry sliding wear of gradient AlNi/SiC composites. Wear, 301: 688-694.
Direct Link  |  

Ma, Z.Y. and R.S. Mishra, 2005. Development of ultrafine-grained microstructure and low temperature (0.48 Tm) super plasticity in friction stir processed Al-Mg-Zr. Scr. Mater., 53: 75-80.
Direct Link  |  

Ma, Z.Y., R.S. Mishra, M.W. Mahoney and R. Grimes, 2003. High strain rate super plasticity in friction stir processed Al-Mg-Zr alloy. Mater. Sci. Eng. A., 351: 148-153.
Direct Link  |  

Mishra, R.S., Z.Y. Ma and I. Charit, 2003. Friction stir processing: A novel technique for fabrication of surface composite. Mater. Sci. Eng. A., 341: 307-310.
Direct Link  |  

Naeem, H.T., 2015. The effect of Nickel, Cobalt and Tin on the evolution of ‎microstructural and mechanical properties ‎ of Al-Zn-Mg-Cu alloys (7000 series) via casting, ‎powder metallurgy and friction stir processing ‎techniques. Ph.D Thesis, Al Muthanna University, Samawah, Iraq.

Naeem, H.T., 2017. Characterizations particulates of crushed particles (Al-Zn-Mg-Cu-Ni) for fabrication of surface composites Al-Alloy using friction stir processing route. Muthanna J. Eng. Technol., 1: 56-65.
CrossRef  |  Direct Link  |  

Naeem, H.T., K.S. Mohammed and K.R. Ahmad, 2014. The role of cobalt and nickel intermetallic phases on the mechanical properties and microstructure evolution of Al-Zn-Mg-Cu alloys. Mater. Res., 17: 1663-1676.
Direct Link  |  

Naeem, H.T., K.S. Mohammed and K.R. Ahmad, 2015. Effect of friction stir processing on the microstructure and hardness of an Aluminum-Zinc-Magnesium-Copper alloy with nickel additives. Phys. Met. Metall., 116: 1035-1046.
Direct Link  |  

Naeem, H.T., K.S. Mohammed, K.R. Ahmad and A. Rahmat, 2014. The influence of nickel and tin additives on the microstructural and mechanical properties of Al-Zn-Mg-Cu Alloys. Adv. Mater. Sci. Eng., 2014: 1-10.
Direct Link  |  

Raaft, M., T.S. Mahmoud, H.M. Zakaria and T.A. Khalifa, 2011. Microstructural, mechanical and wear behavior of A390/graphite and A390/Al₂O₃ surface composites fabricated using FSP. Mater. Sci. Eng. A., 528: 5741-5746.
Direct Link  |  

Rana, H.G., V.J., Badheka and A. Kumar, 2016. Fabrication of Al7075/B4C surface composite by novel Friction Stir Processing (FSP) and investigation on wear properties. Procedia Technol., 23: 519-528.
Direct Link  |  

Wang, K., F.C. Liu, Z.Y. Ma and F.C. Zhang, 2011. Realization of exceptionally high elongation at high strain rate in a friction stir processed Al-Zn-Mg-Cu alloy with the presence of liquid phase. Scr. Mater., 64: 572-575.
Direct Link  |  

Zolotorevsky, V.S., N.A. Belov and M.V. Glazoff, 2007. Casting Aluminum Alloys. Vol. 12, Elsevier, Amsterdam, Netherlands, ISBN:9780080453705, Pages: 530.