Journal of Engineering and Applied Sciences
Year:
2018
Volume:
13
Issue:
22
Page No.
9548 - 9552
Study Properties of Al-Mg-Si (6000) Matrix Composites Reinforced with
Alumina Particles Using Powder Metallurgy
Authors :
HaiderTawfiq Naeem
References
Ezatpour, H.R., S.A. Sajjadi, M.H. Sabzevar, A. Chaichi and G.R. Ebrahimi, 2017. Processing map and microstructure evaluation of AA6061/Al
2O
3 nanocomposite at different temperatures. Trans. Nonferrous Met. Soc. China, 27: 1248-1256.
CrossRef | Direct Link | Jamaludin, S.B., M.H. Abdullah, M.N. Mazlee and K. Hussin, 2015. Effect of solution treatment temperature on tensile strength of Al-Mg-Si alloy. Mater. Sci. Forum, 819: 39-44.
Direct Link | MacAskill, I.A., D.W. Heard and D.P. Bishop, 2007. Effects of Silicon on the metallurgy and sintering response of Al-Ni-Mg PM alloys. Mater. Sci. Eng., 452: 688-698.
Direct Link | Murugesan, K., A.M. Murugan and V. Baskaran, 2015. Dry sliding tribological characterization and parameters optimization of Aluminium hybrid metal matrix composite for automobile brake rotor applications. Intl. J. Appl. Eng. Res., 10: 21102-21109.
Naeem, H.T., 2014. Effectiveness of Alumina dispersoids particles within (7xxx Series) Aluminum alloy under the retrogression and reaging treatments. Dig. J. Nanomater. Biostructures, 9: 295-304.
Direct Link | Naeem, H.T., J.F. Odeh and A. Mohamed, 2018. Role of sintering, co-particles on properties of milled Al-Zn-Mg-Cu matrix produced via PM. J. Global Pharma Technol., 12: 85-90.
Naeem, H.T., K.S. Mohammad, K.R. Ahmad and A. Rahmat, 2014. Characteristics of Al-Zn-Mg-Cu alloys with Nickel additives synthesized via mechanical alloying, cold compaction and heat treatment. Arabian J. Sci. Eng., 39: 9039-9048.
CrossRef | Nami, H., H. Adgi, M. Sharifitabar and H. Shamabadi, 2011. Microstructure and mechanical properties of friction stir welded Al/Mg
2Si metal matrix cast composite. Mater. Des., 32: 976-983.
Direct Link | Purohit, R., M.M.U. Qureshi and R.S. Rana, 2017. The effect of hot forging and heat treatment on wear properties of Al6061-Al
2O
3 Nano composites. Mater. Today Proc., 4: 4042-4048.
CrossRef | Shankar, M.C.G., M. Shettar, S.S. Sharma and A. Kini, 2018. Enhancement in hardness and influence of artificial aging on stir cast Al6061-B
4C and Al6061-SiC Composites. Mater. Today Proc., 5: 2435-2443.
CrossRef | Sonawane, P.M. and M.G. Karnik, 2017. Experimental investigation of optimum level of reinforcementswithin 6061Al Alloy for better tribological and mechanical properties. Mater. Today Proc., 4: 3290-3299.
CrossRef | Direct Link | Umanath, K., S.T. Selvamani, K. Palanikumar and R. Sabarikreeshwaran, 2014. Dry sliding wear behaviour of AA6061-T
6 reinforced SiC and Al
2O
3 particulate hybrid composites. Procedia Eng., 97: 694-702.
CrossRef | Unlu, B.S., 2008. Investigation of tribological and mechanical properties Al
2O
3-SiC reinforced Al composites manufactured by casting or P/M method. Mater. Des., 29: 2002-2008.
CrossRef |