References

Badran, S.F. and M.A.A. El-Kader, 2012. A new quantitative fatigue life assessment using alternative stiffened panels in midship section. Eur. J. Sci. Res., 90: 473-492.
Direct Link  |  

Badran, S.F. and M.A.A. El-Kader, 2012. Increasing fatigue life in ship structures using Y-stiffeners with right angle of hat. Eur. J. Sci. Res., 91: 364-380.

Badran, S.F., A.B. Saddek and H.W. Leheta, 2013. Ultimate strength of Y and T stiffeners subjected to lateral loads with three different levels of initial imperfection. Ocean Eng., 61: 12-25.
CrossRef  |  Direct Link  |  

El-Hanafi, A.S., S.F. Badran and H.W. Leheta, 2013. Design of Y Stiffened Panels in Double Hull Tanker Under Axial Compressive Loads. In: Analysis and Design of Marine Structures, Soares, G. and J. Romanoff (Eds.). CRC Press, Boca Raton, Florida, USA., pp: 291-300.

Erny, C., D. Thevenet, J.Y. Cognard and M. Korner, 2012. Fatigue life prediction of welded ship details. Mar. Struct., 25: 13-32.
Direct Link  |  

Fischer, C. and W. Fricke, 2016. Effect of the stress distribution in simple welded specimens and complex components on the crack propagation life. Intl. J. Fatigue, 92: 488-498.
CrossRef  |  Direct Link  |  

Fricke, W., L. Gao and H. Paetzold, 2017. Fatigue assessment of local stresses at fillet welds around plate corners. Intl. J. Fatigue, 101: 169-176.
CrossRef  |  Direct Link  |  

Hughes, O.F. and J.K. Paik, 2010. Ship Structural Analysis and Design. Society of Naval Architects and Marine, New Jersey, USA., ISBN:9780939773824,.

Leheta, H.W., A.S. Elhanafi and S.F. Badran, 2016. A numerical study of the ultimate strength of Y-deck panels under longitudinal in-plane compression. Thin Walled Struct., 100: 134-146.
CrossRef  |  Direct Link  |  

Leheta, H.W., S.F. Badran and A.S. Elhanafi, 2015. Ship structural integrity using new stiffened plates. Thin Walled Struct., 94: 545-561.
CrossRef  |  Direct Link  |  

Li, Z., W. Mao, J.W. Ringsberg, E. Johnson and G. Storhaug, 2014. A comparative study of fatigue assessments of container ship structures using various direct calculation approaches. Ocean Eng., 82: 65-74.
CrossRef  |  Direct Link  |  

Mahmoud, H. and G. Riveros, 2014. Fatigue reliability of a single stiffened ship hull panel. Eng. Struct., 66: 89-99.
CrossRef  |  Direct Link  |  

Tasdemir, A. and S. Nohut, 2012. Fatigue analysis of ship structures with hinged deck design by finite element method: A case study: Fatigue analysis of the primary supporting members of 4900 PCTC. Mar. Struct., 25: 1-12.
CrossRef  |  Direct Link  |  

Yang, M., B. Ji, Z. YuanZhou and Z. Fu, 2016. Fatigue behavior and strength evaluation of vertical stiffener welded joint in orthotropic steel decks. Eng. Fail. Anal., 70: 222-236.
CrossRef  |  Direct Link  |