Journal of Engineering and Applied Sciences

Year: 2019
Volume: 14
Issue: 21
Page No. 7800 - 7808

Analysis of Structural Strength of Modular Floating Pontoon as the Beam of Floating House

Authors : Aulia Windyandari, Surya Daud Marulam Tua Sihite, Suharto Suharto and Samuel Samuel

References

Altair University, 2012. Practical Aspects of Finite Element Simulation: A Study Guide. Altair University, Troy, Michigan,.

Anonymous, 2013. Linear static analysis. Altair Engineering, Bengaluru, India.

Bae, D.M., A.R. Prabowo, B. Cao, A.F. Zakki and G.D. Haryadi, 2016. Study on collision between two ships using selected parameters in collision simulation. J. Mar. Sci. Appl., 15: 63-72.
Direct Link  |  

Canby, C.D., 1969. Ferro-cement with particular reference to marine applications. Ph.D Thesis, University of Michigan, Ann Arbor, Michigan.

Chrismianto, D., A.F. Zakki, B. Arswendo and D.J. Kim, 2015. Development of cubic Bezier curve and curve-plane intersection method for parametric submarine hull form design to optimize hull resistance using CFD. J. Mar. Sci. Appl., 14: 399-405.
Direct Link  |  

Harsono, W., F. Harahap, A. Djausal, J.B. Manga and A. Hayat et al., 1980. Ferrocement technology in Indonesia. Master Thesis, Institut Teknologi Bandung, Bandung, Indonesia.

Jei, Y.G. and C.W. Lee, 1988. Finite element model of asymmetrical rotor-bearing systems. KSME. J., 2: 116-124.
Direct Link  |  

Kumar, A., 2005. Ferrocement box sections-viable option for floors and roof of multi-storeyed buildings. Asian J. Civ. Eng., 6: 569-582.
Direct Link  |  

Phongthanapanich, S. and P. Dechaumphai, 2009. Combined finite volume and finite element method for convection-diffusion-reaction equation. J. Mech. Sci. Technol., 23: 790-801.
Direct Link  |  

Prabowo, A.R., B. Cao, D.M. Bae, S.Y. Bae and A.F. Zakki et al., 2017. Structural analysis of the double bottom structure during ship grounding by finite element approach. Lat. Am. J. Solids Struct., 14: 1106-1123.
Direct Link  |  

Prabowo, A.R., D.M. Bae, J.M. Sohn and A.F. Zakki, 2016. Evaluating the parameter influence in the event of a ship collision based on the finite element approach. Intl. J. Technol., 7: 592-602.
Direct Link  |  

Prabowo, A.R., D.M. Bae, J.M. Sohn, A.F. Zakki and B. Cao et al., 2017. Analysis of structural behavior during collision event accounting for bow and side structure interaction. Theor. Appl. Mech. Lett., 7: 6-12.
Direct Link  |  

Prabowo, A.R., D.M. Bae, J.M. Sohn, A.F. Zakki and B. Cao et al., 2017. Effects of the rebounding of a striking ship on structural crashworthiness during ship-ship collision. Thin Walled Struct., 115: 255-259.
Direct Link  |  

Prabowo, A.R., D.M. Bae, J.M. Sohn, A.F. Zakki and B. Cao, 2017. Rapid prediction of damage on a struck ship accounting for side impact scenario models. Open Eng., 7: 91-99.
Direct Link  |  

Rathish, K.P., 2010. High performance super plasticized silica fume mortars for ferrocement works. Facta Univ. Ser. Archit. Civ. Eng., 8: 129-134.
CrossRef  |  

Teoh, B.T., 2010. Floating house to tackle problems during flash flood. Ph.D Thesis, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

Tran, T.T. and D.H. Kim, 2015. The aerodynamic interference effects of a floating offshore wind turbine experiencing platform pitching and yawing motions. J. Mech. Sci. Technol., 29: 549-561.
Direct Link  |  

Wang, C., S.X. Fu, N. Li, W.C. Cui and Z.M. Lin, 2006. Dynamic analysis of a pontoon-separated floating bridge subjected to a moving load. China Ocean Eng., 20: 419-430.
Direct Link  |  

Yudo, H., A. Windyandari and A.F. Zakki, 2017. Numerical investigation of the buckling strength behavior of ring stiffened submarine pressure hull. Intl. J. Civ. Eng. Technol., 8: 408-415.
Direct Link  |  

Zakki, A.F., A. Windyandari and D.M. Bae, 2016. The development of new type free-fall lifeboat using fluid structure interaction analysis. J. Mar. Sci. Technol., 24: 575-580.
CrossRef  |  Direct Link  |  

Zakki, A.F., D.M. Bae, S. Susilo, E.A. Sipayung and Suharto, 2017. Structure design and characteristic analysis of buckling strength on swedge frame pressure hull with finite element analysis. ARPN. J. Eng. Appl. Sci., 12: 821-833.

Design and power by Medwell Web Development Team. © Medwell Publishing 2024 All Rights Reserved