References

Assegaf, A., A. Purwadi and Y. Haroen, 2013. Dynamic response analysis of permanent magnet synchronous motor drives for city electric car. Proceedings of the International Conference on Information Technology and Electrical Engineering, October 7-8, 2013, IEEE., Yogyakarta, Indonesia, pp: 365-369.

Deshpande, Y., H.A. Toliyat and X. Wang, 2012. Standstill position estimation of SPMSM. Proceedings of the IECON 38th Annual International Conference on Industrial Electronics Society, October 25-28, 2012, IEEE., Montreal, Canada, pp: 2024-2029.

Dost, P. and C. Sourkounis, 2011. Mechanical and electrical behaviour of an electric vehicles drive train due to the choice of the control-system. Proceedings of the 37th Annual International Conference on IEEE Industrial Electronics Society, November 7-10, 2011, IEEE., Melbourne, Australia, pp: 1426-1431.

Fang, S., B. Zhou and Y. Liu, 2009. Design and realization of dual redundancy PMSM electrical drive systems. Proceedings of the 4th IEEE International Conference on Industrial Electronics and Applications, May 25-27, 2009, IEEE, Xi'an, China, pp: 1985-1989.

Iizuka, K., H. Uzuhashi, M. Kano, T. Endo and K. Mohri, 1985. Microcomputer control for sensorless brushless motor. IEEE Trans. Ind. Applic., IA-21: 595-601.
CrossRef  |  Direct Link  |  

Jebai, A.K., F. Malrait, P. Martin and P. Rouchon, 2016. Sensorless position estimation and control of permanent-magnet synchronous motors using a saturation model. Int. J. Control, 89: 535-549.
CrossRef  |  Direct Link  |  

Kim, H., K.K. Huh, R.D. Lorenz and T.M. Jahns, 2004. A novel method for initial rotor position estimation for IPM synchronous machine drives. IEEE. Trans. Ind. Applic., 40: 1369-1378.
CrossRef  |  Direct Link  |  

Moghadam, M.A.G. and F. Tahami, 2012. Sensorless control of PMSMs with tolerance for delays and stator resistance uncertainties. IEEE. Trans. Power Electron., 28: 1391-1399.
CrossRef  |  Direct Link  |  

Pillai, N.S., A.M. Vipin and R. Radhakrishnan, 2015. Analysis and simulation studies for position sensorless BLDC motor drive with initial rotor position estimation. Proceedings of the International Conference on Nascent Technologies in the Engineering Field, January 9-10, 2015, IEEE., Navi Mumbai, India, pp: 1-6.

Setty, A.R., S. Wekhande and K. Chatterjee, 2012. Comparison of high frequency signal injection techniques for rotor position estimation at low speed to standstill of PMSM. Proceedings of the IEEE 5th India Conference on Power Electronics (IICPE), December 6-8, 2012, IEEE., Delhi, India, pp: 1-6.

Wang, G., R. Yang, W. Chen, Y. Yu and D. Xu et al., 2009. Initial position estimation for sensorless surface-mounted PMSM with near-zero saliency at standstill. Proceedings of the IEEE International Conference on Vehicle Power and Propulsion, September 7-10, 2009, IEEE., Dearborn, Michigan, USA., pp: 1403-1406.

Yang, S.C., 2014. Saliency-based position estimation of permanent-magnet synchronous machines using square-wave voltage injection with a single current sensor. IEEE. Trans. Ind. Applic., 51: 1561-1571.
CrossRef  |  Direct Link  |  

Zhang, Y., J. Gu, Z. Wu and J. Ying, 2005. Investigation of high frequency injection method for surface-mounted PMSM sensor-less drive. Proceedings of the International Conference on Electrical Machines and Systems, Volume 1, September 27-29, 2005, IEEE., Nanjing, China, pp: 306-309.

Zhaobin, H., Y. Linru and W. Zhaodong, 2014. Sensorless initial rotor position identification for non-salient permanent magnet synchronous motors based on dynamic reluctance difference. IET. Power Electron., 7: 2336-2346.
CrossRef  |  Direct Link  |