References

Chow, H.M., B.H. Yan, F.Y. Huang and J.C. Hung, 2000. Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining. J. Mater. Proces. Technol., 101: 95-103.
CrossRef  |  Direct Link  |  

Cogun, C., B. Ozerkan and T. Karacay, 2006. An experimental investigation on the effect of powder mixed dielectric on machining performance in electrical discharge machining. J. Eng. Manuf., 220: 1035-1050.
CrossRef  |  

Erden, A. and S. Bilgin, 1980. Role of impurities in electric discharge machining. Proceedings of the 21st International Machine Tool Design and Research Conference, (IMTDRC`80), Macmillan, London, pp: 345-350.

Furutani, K. and K. Shiraki, 2002. Deposition of lubricant layer during finishing process by electrical discharge machining with molybdenum disulphide powder suspended in working fluid. Proceedings of JSME/ASME International Conference on Materials and Processing, (ICMP`02), Honolulu, Hawaii, USA., pp: 468-473.

Furutani, K., A. Saneto, H. Takezawa, N. Mohri and H. Miyake, 2001. Accertation of titanium carbide by electrical discharge machining with powder suspended in working fluid. Precision Eng., 25: 138-144.

Furutani, K., H. Sato and M. Suzuki, 2009. Influence of electrical conditions on performance of electrical discharge machining with powder suspended in working oil for titanium carbide deposition process. Int. J. Adv. Manuf. Technol., 40: 1093-1101.
CrossRef  |  

Jeswani, M.L., 1981. Effect of the addition of graphite powder to kerosene used as the dielectric fluid in electrical discharge machining. Wear, 70: 133-139.
CrossRef  |  Direct Link  |  

Kansal, H., S. Singh and P. Kumar, 2003. State of the art concerning powder mixed EDM. Proceedings of the International Conference on Emerging Technology, (ICET�03), KIIT, Bhubansewar, India.

Kansal, H.K., S. Singh and P. Kumar, 2005. Parametric optimization of powder mixed electrical discharge machining by response surface methodology. J. Mater. Proc. Technol., 169: 427-436.
CrossRef  |  

Kansal, H.K., S. Singh and P. Kumar, 2007. Effect of silicon powder mixed EDM on machining rate of aisi D2 die steel. J. Manuf. Process., 9: 13-22.
CrossRef  |  

Kobayashi, K., T. Magara, Y. Ozaki and T. Yatomi, 1992. The present and future developments of electrical discharge machining. Proceedings of the 2nd International Conference on Die and Mould Technology, (ICDMT`92), Singapore, pp: 35-47.

Kung, K.Y., J.T. Horng and K.T. Chiang, 2009. Material removal rate and electrode wear ratio study on the powder mixed electrical discharge machining of cobalt-bonded tungsten carbide. Int. J. Adv. Manuf. Technol., 40: 95-104.
CrossRef  |  

Kunieda, M. and K. Yanatori, 1997. Study on debris movement in EDM gap. Int. J. Electr. Mach., 2: 43-49.

Luo, Y.F., 1997. The dependence of interspace discharge transitivity upon the gap debris in precision electrodischarge machining. J. Mater. Process. Technol., 68: 127-131.
CrossRef  |  

Mohri, N., J. Tsukamoto and M. Fujino, 1988. Surface modification by EDM-an innovation in EDM with semi-conductive electrodes. Proc. Winter Ann. Meet ASME, 34: 21-30.

Mohri, N., N. Saito, M. Higashi and N. Kinoshita, 1991. A new process of finish machining on free surface by EDM methods. CIRP Ann. Manuf. Technol., 40: 207-210.
CrossRef  |  

Mohri, N., N. Saito, T. Takawashi and T. Takawashi, 1985. Mirror-like finishing by EDM. Proceedings of the 25th International Symposium on Machine Tool Design and Symposium, May 1985, UK., pp: 329-336.

Montgomery, D.C., 1991. Design and Analysis of Experiments. 3rd Edn., John Wiley & Sons Inc., New York, Pages: 500.

Narumiya, H., N. Mohri, N. Saito, H. Otake, Y. Tsnekawa, T. Takawashi and K. Kobayashi, 1989. EDM by powder suspended working fluid. Proceedings of the 9th ISEM, April 1989, Japan, pp: 5-8.

Ojha, K., R.K. Garg and K.K. Singh, 2010. MRR improvement in sinking electrical discharge machining: A review. J. Miner. Mater. Charact. Eng., 9: 709-739.
Direct Link  |  

Ojha, K., R.K. Garg and K.K. Singh, 2011. The effect of nickel micro powder suspended dielectric on EDM performance measures of EN-19 steel. J. Eng. Applied Sci., 6: 27-37.

Okada, A., Y. Uno, K. Hirao and T. Takagi, 2000. Formation of hard layer by EDM with carbon powder mixed fluid using titanium electrode. Proceedings of 5th International Conference on Progress of Machining Technology, (ICPMT`00), USA., pp: 464-469.

Pecas, P. and E. Henriques, 2003. Influence of silicon powder-mixed dielectric on conventional electrical discharge machining. Int. J. Mach. Tools Manuf., 43: 1465-1471.
CrossRef  |  Direct Link  |  

Pecas, P. and E. Henriques, 2008. Effect of the powder concentration and dielectric flow in the surface morphology in electrical discharge machining with powder-mixed dielectric (PMD-EDM). Int. J. Adv. Manuf. Technol., 37: 1120-1132.
CrossRef  |  

Pecas, P. and E. Henriques, 2008. Electrical discharge machining using simple and powder-mixed dielectric: The effect of the electrode area in the surface roughness and topography. J. Mater. Process. Technol., 200: 250-258.
CrossRef  |  

Prihandana, G.S., M. Mahardika, M. Hamdi, Y.S. Wong and K. Mitsui, 2009. Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes-Taguchi approach. Int. J. Mach. Tools Manuf., 49: 1035-1041.
CrossRef  |  

Simao, J., H.G. Lee, D.K. Aspinwall, R.C. Dewes and E.M. Aspinwall, 2003. Work piece surface modification using electrical discharge machining. Int. J. Machine Tools Manuf., 43: 121-128.
CrossRef  |  

Tzeng, F.Y. and F.C. Chen, 2003. A simple approach for robust design of high speed electrical-discharge machining technology. Int. J. Mach. Tools Manuf., 43: 217-227.
CrossRef  |