References

Baker, A.A., 1988. Crack Patching. In: Bonded Repair of Aircraft Structures, Baker, A.A. and R. Jones (Eds.). Martinus Nijhoff, Dordrecht, pp: 107-173.

Baker, A.A., 1991. Fatigue crack propagation studies on aluminum panels patched with boron/epoxy composites. Proceeding of the International Conference on Aircraft Damage Assessment and Repair, August 1991, Barton, ACT, pp: 209-215.

Chandra, R. and K. Guruprasad, 1987. Numerical estimation of stress intensity factors in patched cracked plates. Eng. Fracture Mech., 27: 559-569.
CrossRef  |  

Chue, C.H., W.C. Chou and T.J.C. Liu, 1996. The effects of size and stacking of composite laminated patch on bonded repair for cracked hole. Applied Compos. Mater., 3: 355-367.
CrossRef  |  

Hu, F.Z. and C. Soutis, 2000. Strength prediction of patch repaired CFRP laminates loaded in compression. Compos. Sci. Technol., 60: 1103-1114.
CrossRef  |  

Kam, T.Y., K.H. Chu and Y.C. Tsai, 1998. Fatigue of cracked plates repaired with single-sided composite patches. AIAA J., 36: 645-650.

Lena, M.R., J.C. Klug and C.T. Sun, 1998. Composite patches as reinforcements and crack arrestors in aircraft structures. J. Aircraft, 35: 2-14.

Pardoen, T., F. Hacheza, B. Marchionia, P.H. Blythb and A.G. Atkinsb, 2004. Mode I fracture of sheet metal. J. Mech. Phys. Solids, 52: 423-452.
CrossRef  |  

Pardoen, T., Y. Marchal and F. Delannay, 1999. Thickness dependence of cracking resistance in thin aluminium plate. J. Mech. Phys. Solids, 47: 2093-2123.
CrossRef  |  

Pardoen, T., Y. Marchal and F. Delannay, 2009. Essential work of fracture compared to fracture Mechanics-towards a thickness independent plane stress toughness. Eng. Fracture Mech., 69: 617-631.
CrossRef  |  

Park, J.H., T. Ogiso and S.N. Atluri, 1992. Analysis of cracks in aging aircraft structures with and without composite-patch repairs. Computational Mech., 10: 169-201.
CrossRef  |  

Schubbe, J.J. and S. Mall, 1999. Modeling of cracked thick metallic structure with bonded composite patch repair using three-layer technique. Compos. Struc., 45: 185-193.
CrossRef  |  

Shahani, A.R., M. Rastegar, M.B. Dehkordi and H.M. Kashani, 2010. Experimental and numerical investigation of thickness effect on ductile fracture toughness of steel alloy sheets. Eng. Fracture Mech., 77: 646-659.
CrossRef  |  

Soutis, C. and F.Z. Hu, 1997. Design and performance of bonded patch repairs of composite structures. Proc. Inst. Mech. Eng., 211: 263-271.
CrossRef  |  

Sun, C.T., J.A. Klug and C. Arendt, 1996. Analysis of cracked aluminum plates repaired with bonded composite patches. AIAA J., 34: 369-374.
Direct Link  |  

Umamaheswar, T.V.R.S. and R. Singh, 1999. Modeling of patch repair to a thin cracked sheet. Eng. Fracture Mech., 62: 267-289.
CrossRef  |  

Wang, H.W., Y.l. kang, Z.F. Zhang and Q.H. Qin, 2008. Size effect on the fracture toughness of metallic foil. Int. J. Fracture, 123: 177-185.
CrossRef  |  

Young, A., D.J. Cartwright and D.P. Rooke, 1988. The boundary element method for analyzing repair patches on cracked finite sheets. Aeronautical J. Royal Aeronautical Soc., 92: 416-421.

Young, A., D.P. Rooke and D.J. Cartwright, 1992. Analysis of patched and stiffened cracked panels using the boundary element method. Intl. J. Solid Struct., 29: 2201-2216.
CrossRef  |  Direct Link  |  

Young, A., D.P. Rooke and D.J. Cartwright, 1989. Numerical study of balanced patch repairs to cracked sheets. Aeronautical J. Royal Aeronautical Soc., 93: 327-334.
Direct Link  |