References

AISC, 2005. Seismic Provisions for Structural Steel Buildings. American Istitute of Steel Construction Inc., Chicago, USA.

Abdollahzadeh, G., M.R. Banihashemi, S. Elkaee and M.E. Amiri, 2013. Response modification factor of dual moment resistant frame with buckling resistant brace. Steel Compos. Struct., 14: 464-486.
Direct Link  |  

Annan, C.D., M.A. Youssef and M.H. El-Naggar, 2009. Experimental evaluation of the seismic performance of modular steel-braced frames. Eng. Struct., 31: 1435-1446.
CrossRef  |  Direct Link  |  

BHRC, 2005. Iranian Code of Practice for Seismic Resistance Design of Buildings. 3rd Edn., Building and Housing Research Center, Tehran, Iran.

Broderick, B.M., A.Y. Elghazouli and J. Goggins, 2008. Earthquake testing and response analysis of concentrically-braced sub-frames. J. Constr. Steel Res., 64: 997-1007.
CrossRef  |  Direct Link  |  

Chao, S.H., S.C. Goel and S.S. Lee, 2007. A seismic design lateral force distribution based on inelastic state of structures. Earthquake Spectra, 23: 547-569.
CrossRef  |  Direct Link  |  

FEMA, 2006. Applied technology council: Redwood city. 440 Report, Federal Emergency Management Agency, Washington, DC.

Goel, S.C. and S.H. Chao, 2009. Performance-Based Plastic Design: Earthquake-Resistant Steel Structures. International Code Council, California, pp: 261.

Kharmale, S.B. and S. Ghosh, 2012. Seismic lateral force distribution for ductility-based design of steel plate shear walls. Earthquake Tsunami, Vol. 6 10.1142/S1793431112500042

Lee, S.S. and S.C. Goel, 2001. Performance-based design of steel moment frames using target drift and yield mechanism. Report No. UMCEE 01-17, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI.

Leelataviwat, S., S.C. Goel and B. Stojadinovic, 1999. Toward performance-based seismic design of structures. Earthquake Spectra, 15: 435-461.
CrossRef  |  Direct Link  |  

Liao, W.C. and S.C. Goel, 2012. Performance based plastic design and energy-based evaluation of seismic resistant RC moment frame. Marine Sci. Technol., 20: 304-310.
Direct Link  |  

MacRae, G., Y. Kimura and C. Roeder, 2004. Effect of column stiffness on braced frame seismic behavior. J. Struct. Eng., 130: 381-391.
CrossRef  |  Direct Link  |  

Miranda, E. and V.V. Bertero, 1994. Evaluation of strength reduction factors for earthquake-resistant design. Earthquake Spectra, 10: 357-379.
CrossRef  |  Direct Link  |  

Newmark, N.M. and W.J. Hall, 1982. Earthquake Spectra and Design. 1st Edn., Earthquake Engineering Research, Berkeley, California, ISBN-13: 978-0943198224, Pages: 103.

Redwood, R.G. and V.S. Channagiri, 1991. Earthquake resistant design of concentrically braced steel frames. Can. J. Civil Eng., 18: 839-850.
CrossRef  |  Direct Link  |  

Richards, P., 2009. Seismic column demands in ductile braced frames. J. Struct. Eng., 135: 33-41.
Direct Link  |  

Sahoo, D.R. and S.H. Chao, 2010. Performance-based plastic design method for buckling-restrained braced frames. Eng. Struct., 32: 2950-2958.
CrossRef  |  Direct Link  |  

Shaback, B. and T. Brown, 2003. Behaviour of square hollow structural steel braces with end connections under reversed cyclic axial loading. Can. J. Civil Eng., 30: 745-753.
CrossRef  |  Direct Link  |  

Tang, X. and S. Goel, 1989. Brace fractures and analysis of phase I structure. J. Struct. Eng., 115: 1960-1976.
CrossRef  |  Direct Link  |  

Uang, C.M. and V.V. Bertero, 1988. Use of energy as a design criterion in earthquake-reistant design. Report No. UCB/EERC-88/18, Earthquake Engineering Research Center, University of California, Berkeley, CA., USA.

Uriz, P., 2005. Towards earthquake resistant design of concentrically braced steel structures. Ph.D. Thesis, University of California, Berkeley.