Journal of Engineering and Applied Sciences

Year: 2016
Volume: 11
Issue: 12
Page No. 2827 - 2833

Assessment of the Different Arrangement of the Electrodes in the Capacitive Sensor in Two-Phase Flow Using Numerical Simulation and the Introduction of a New Electrode

Authors : Abbas Soleimani Manesh and Naser Teymoori Khanesari

References

Abouelwafa, M.S.A. and E.J.M. Kendall, 1980. The use of capacitance sensors for phase percentage determination in multiphase pipelines. IEEE. Trans. Instrum. Measur., 29: 24-27.
CrossRef  |  Direct Link  |  

Ahmed, H., 2006. Capacitance sensors for void-fraction measurements and flow-pattern identification in air &# 8211: Oil two-phase flow. IEEE. Sens. J., 6: 1153-1163.
CrossRef  |  Direct Link  |  

Ahmed, W.H. and B.I. Ismail, 2008. Innovative techniques for two-phase flow measurements. Recent Patents Electr. Electron. Eng., 1: 1-13.
Direct Link  |  

Jaworek, A., A. Krupa and M. Trela, 2004. Capacitance sensor for void fraction measurement in water-steam flows. Flow Measur. Instrum., 15: 317-324.
Direct Link  |  

Ma, Y.P., N.M. Chung, B.S. Pei, W.K. Lin and Y.Y. Hsu, 1991. Two simplified methods to determine void fractions for two-phase flow. Nucl. Technol., 94: 124-133.
Direct Link  |  

Olsen, H.O., 1967. Theoretical and experimental investigation of impedance void meters. Kjeller Research Centre, Norway, Europe.

Reis, E.D. and D.D.S. Cunha, 2014. Experimental study on different configurations of capacitive sensors for measuring the volumetric concentration in two-phase flows. Flow Measur. Instrum., 37: 127-134.
Direct Link  |  

Reis, E.D. and L. Goldstein, 2005. A procedure for correcting for the effect of fluid flow temperature variation on the response of capacitive void fraction meters. Flow Measur. Instrum., 16: 267-274.
Direct Link  |  

Salehi, M.R. and S.G. Abbas, 2013. The use of the ultrasound flow meter for measurement of multi-phase flow in oil wells of south oil areas. Sci. Promotional Mon. Explor. Prod. Oil Gas, 102: 24-28.

Strazza, D., M. Demori, V. Ferrari and P. Poesio, 2011. Capacitance sensor for hold-up measurement in high-viscous-oil-conductive-water core-annular flows. Flow Measur. Instrum., 22: 360-369.
Direct Link  |  

Tan, C., P. Li, W. Dai and F. Dong, 2015. Characterization of oil-water two-phase pipe flow with a combined conductivity-capacitance sensor and wavelet analysis. Chem. Eng. Sci., 134: 153-168.
Direct Link  |  

Tollefsen, J. and E.A. Hammer, 1998. Capacitance sensor design for reducing errors in phase concentration measurements. Flow Measur. Instrum., 9: 25-32.
Direct Link  |  

Yang, H.C., D.K. Kim and M.H. Kim, 2003. Void fraction measurement using impedance method. Flow Measur. Instrum., 14: 151-160.
Direct Link  |  

Design and power by Medwell Web Development Team. © Medwell Publishing 2024 All Rights Reserved