Journal of Engineering and Applied Sciences

Year: 2017
Volume: 12
Issue: 14
Page No. 3720 - 3723

Growth and Characterization of CuInTe Thin Films: Review

Authors : HoSoonmin

References

Ali, A., M. Mehdi and B. Farshad, 2017. Facile hydrothermal synthesis of CuInTe2 quantum dots using reseda as a green capping agent for increasing the efficiency of dye sensitized solar cells. J. Mater. Sci. Mater. Electron., 28: 6366-6372.
CrossRef  |  Direct Link  |  

Ananthan, M.R. and S. Kasiviswanathan, 2009. Growth and characterization of stepwise flash evaporated CuInTe2 thin films. Sol. Energy Mater. Sol. Cells, 93: 188-192.
Direct Link  |  

Anuar, K., T.W. Tee, A.H. Abdullah, N. Saravanan and H.S. Min, 2010. Deposition and characterization of Cu4SnS4 thin films by chemical bath deposition method. Macedonian J. Chem. Chem. Eng., 29: 97-103.
Direct Link  |  

Anuar, K., W.T. Tan, M.S. Atan, K. Dzulkefly, S.M. Ho, H.M. Jelas and N. Saravanan, 2007. Cyclic voltammetry study of copper tin sulfide compounds. Pac. J. Sci. Technol., 8: 252-260.
Direct Link  |  

Arun, V., T. Du and B.S. Kalpathy, 2005. Characterization of Copper Indium ditelluride/electrolyte interface utilizing electrochemical impedance spectroscopy. Appl. Surf. Sci., 242: 168-176.
Direct Link  |  

Assali, K.E., M. Boustani, T. Bekkay, A. Khiara and A. Outzourhit et al., 1999. Initial results of CdS/CuInTe2 heterojunction formed by flash evaporation. Sol. Energy Mater. Sol. Cells, 59: 349-353.
Direct Link  |  

Boustani, M., K.E. Assali, T. Bekkay and A. Khiara, 1997. Structural and optical properties of CuInTe2 films prepared by thermal vacuum evaporation from a single source. Sol. Energy Mater. Sol. Cells, 45: 369-376.
Direct Link  |  

Chandran, V., S. Srinivas and K.R. Murali, 2012. Pulse electrodeposited CuInTe2 films. ECS. Trans., 41: 93-98.
CrossRef  |  Direct Link  |  

Cuevas, A., R. Romero, E.A. Dalchiele, J.R. Ramos and F. Martin et al., 2016. Spectrally selective CuS solar absorber coatings on stainless steel and Aluminium. Surf. Interface Anal., 48: 649-653.
CrossRef  |  Direct Link  |  

Dhaygude, H.D., P.P. Chikode, S.K. Shinde, N.S. Shinde and V.J. Fulari, 2017. Evaluation of the holographic parameters by electrosynthesized CdxZn1-xS(X=0.3) thin films using double exposure digital holographic interferometry technique. Opt. Laser Technol., 88: 194-197.
Direct Link  |  

Dixit, P., D. Kavita, K.S. Ashok, T. Vikas and R. Poolla, 2013. Electrochemical growth and studies of indium rich CuInTe2 thin films. Intl. J. Mater. Sci. Appl., 3: 1-5.

Fatas, E., P. Herrasti, J.A. Medina and F. Arjona, 1987. Electrodeposition and characterization of CdS thin films on stainless steel and tin oxide substrates. Electrochim. Acta, 32: 139-148.
Direct Link  |  

Fitzgerald, A.G. and S.M. Potrous, 1989. A micro beam analysis study of some heterojunctions formed with CuInTe2. Sol. Energy Mater., 19: 141-155.
Direct Link  |  

Galindo, H., F. Hanus, M.C. Joliet, A.B. Vincent and L.D. Laude, 1989. Laser induced synthesis of CuInTe2. Proceedings of the International Conference on Optical Science and Engineering, April 16-19, 1989, SPIE, Bellingham, Washington, pp: 77-80.

Ho, S.M., 2014. Atomic force microscopy investigation of the surface morphology of Ni3Pb2S2 thin films. Eur. J. Scient. Res., 125: 475-480.

Ho, S.M., K. Anuar and W.T. Tan, 2013. Thickness dependent characteristics of chemically deposited tin sulphide films. Universal J. Chem., 1: 170-174.
CrossRef  |  Direct Link  |  

Ho, S.M., N. Saravanan, K. Anuar and W.T. Tan, 2012. Temperature dependent surface topography analysis of SnSe thin films using atomic force microscopy. Asian J. Res. Chem., 5: 291-294.
Direct Link  |  

Hossain, M.S., H. Kabir, M.M. Rahman, K. Hasan and M.S. Bashar et al., 2017. Understanding the shrinkage of optical absorption edges of nanostructured Cd-Zn sulphide films for photothermal applications. Applied Surface Sci., 392: 854-862.
CrossRef  |  Direct Link  |  

Ishizaki, T., N. Saito and A. Fuwa, 2004. Electrodeposition of CuInTe2 film from an acidic solution. Surf. Coat. Technol., 182: 156-160.
Direct Link  |  

Kazmerski, L.L. and Y.J. Juang, 1998. Vacuum deposited CuInTe2 thin films: Growth, structural and electrical properties. J. Vac. Sci. Technol., 14: 769-776.

Kim, C., D.H. Kim, Y.S. Son, H. Kim, J.Y. Bae and Y.S. Han, 2012. Solvothermal synthesis and characterization of a CuInTe2 absorber for thin-film photovoltaics. Mater. Res. Bull., 47: 4054-4058.
CrossRef  |  

Kunihiko, T., M. Noriko and U. Hisao, 2007. Preparation of Cu2ZnSnS4 thin films by sulfurizing sol gel deposited precursors. Sol. Energy Mater. Sol. Cells, 91: 1199-1201.
Direct Link  |  

Lacruz, A., C. Rincon, G. Perez and S.M. Wasim, 1984. Electrical and optical properties of CuInTe2 grown from near stoichiometric compositions. Prog. Cryst. Growth Charact., 10: 283-287.
Direct Link  |  

Lakhe, M. and N.B. Chaure, 2014. Characterization of electrochemically deposited CuInTe2 thin films for solar cell applications. Sol. Energy Mater. Sol. Cells, 123: 122-129.
Direct Link  |  

Lugo, S., Y. Sanchez, M. Espindola, F. Oliva and V. Roca et al., 2017.. Cationic compositional optimization of CuIn(S1-ySey)2 ultra-thin layers obtained by chemical bath deposition. Appl. Surf. Sci., 404: 57-62.
Direct Link  |  

Manorama, L., S.K. Mahapatra and N.B. Chaure, 2016. Development of CuInTe2 thin film solar cells by electrochemical route with low temperature (80°C) heat treatment procedure. Mater. Sci. Eng. B., 204: 20-26.
Direct Link  |  

Masoud, D., 2015. Effect of negative and positive field on p-type CuInTe2 films having excess Copper and Indium. Intl. J. Adv. Comput. Technol., 4: 143-146.

Mise, T. and T. Nakada, 2010. Low temperature growth and properties of Cu-In-Te based thin films for narrow bandgap solar cells. Thin Solid Films, 518: 5604-5609.
CrossRef  |  

Mobarak, M. and H.T. Shaban, 2014. Characterization of CuInTe2 crystals. Mater. Chem. Phys., 147: 439-442.
Direct Link  |  

Muftah, G.E.A., A.P. Samantilleke, P.D. Warren, S.N. Heavens and I.M. Dharmadasa, 2010. Electrochemical deposition of CuInTe2 layers for applications in thin film solar cells. J. Mater. Sci. Mater. Electron., 21: 373-379.
CrossRef  |  Direct Link  |  

Murali, K.R., C. Vinothini and K. Srinivasan, 2012. Characteristics of pulse plated Copper Indium telluride films. Mater. Sci. Semicond. Process., 15: 194-198.
Direct Link  |  

Nadenau, V., T. Walter and H.W. Schock, 1995. Growth of CuInTe2 polycrystalline thin films. J. Cryst. Growth, 146: 251-255.
Direct Link  |  

Olgar, M.A., B.M. Basol, Y. Atasoy, M. Tomakin and G. Aygun et al., 2017. Effect of heat treating metallic constituents on the properties of Cu2ZnSnSe4 thin films formed by a two-stage process. Thin Solid Films, 624: 167-174.
Direct Link  |  

Orts, J.L., R. Diaz, P. Herrasti, F. Rueda and E. Fatas, 2007. CuInTe2 and In-rich telluride chalcopyrites thin films obtained by electrodeposition techniques. Sol. Energy Mater. Sol. Cells, 91: 621-628.
Direct Link  |  

Patil, N.A., M. Lakhe and N.B. Chaure, 2012. Characterization of CuInTe2 Thin Films Deposited by Electrochemical Technique. In: AIP Conference Proceedings, Mittal, R., A.K. Chauhan and R. Mukhopadhyay (Eds.). AIP, College Park, Maryland, pp: 1073-1074.

Prabukanthan, P. and R. Dhanasekaran, 2008. Growth of CuInTe2 single crystals by iodine transport and their characterization. Mater. Res. Bull., 43: 1996-2004.
Direct Link  |  

Prabukanthan, P., K. Asokan, D.K. Avasthi and R. Dhanasekaran, 2007. Effect of 80 MeV Au8+ ions irradiation on CuInTe2 single crystals grown by CVT technique. Mater. Sci. Semicond. Process., 10: 252-257.
Direct Link  |  

Pujari, R.B., A.C. Lokhande, J.H. Kim and C.D. Lokhande, 2016. Bath temperature controlled phase stability of hierarchical nanoflakes CoS2 thin films for supercapacitor application. RSC. Adv., 6: 40593-40601.
CrossRef  |  Direct Link  |  

Rai, D.P., A. Shankar, P.S. Anup and T.P. Sinha, 2017. Electronic, optical and thermoelectric properties of bulk and surface (001) CuInTe2: A first principles study. J. Alloys Compd., 699: 1003-1011.
Direct Link  |  

Roy, S., B. Bhattacharjee, S.N. Kundu, S. Chaudhuri and A.K. Pal, 2003. Characterization of CuInTe2 thin film synthesized by three source co-evaporation technique. Mater. Chem. Phys., 77: 365-376.
Direct Link  |  

Roy, S., P. Guha, S. Chaudhuri and A. Pal, 2002. CuInTe2 thin films synthesized by graphite box annealing of In/Cu/Te stacked elemental layers. Vac., 65: 27-38.
Direct Link  |  

Sabah, F.A., N.M. Ahmed and Z. Hassan, 2017. Effects of concentration and substrate type on structure and conductivity of p-type CuS thin films grown by spray pyrolysis deposition. J. Electron. Mater., 46: 218-225.
CrossRef  |  Direct Link  |  

Shaji, S., L.V. Garcia, S.L. Loredo, B. Krishnan and J.A. Martinez et al., 2017. Antimony sulfide thin films prepared by laser assisted chemical bath deposition. Appl. Surf. Sci., 393: 369-376.
Direct Link  |  

Soud, A.M., H.A. Zayed and L.I. Soliman, 1993. Transport properties of CuInS2, CuInSe2 and CuInTe2 thin films. Thin Solid Films, 229: 232-236.
Direct Link  |  

Sridevi, D. and K.V. Reddy, 1986. Electrical conductivity and optical absorption in flash evaporated CuInTe2 thin films. Thin Solid Films, 141: 157-164.
Direct Link  |  

Sugan, S., K. Baskar and R. Dhanasekaran, 2014. Hydrothermal synthesis of chalcopyrite CuInS2, CuInSe2 and CuInTe2 nanocubes and their characterization. Curr. Appl. Phys., 14: 1416-1420.
Direct Link  |  

Sun, K., F. Liu, C. Yan, F. Zhou and J. Huang et al., 2016. Influence of sodium incorporation on kesterite Cu2ZnSnS4 solar cells fabricated on stainless steel substrates. Sol. Energy Mater. Sol. Cells, 157: 565-571.
Direct Link  |  

Takahiro, M. and N. Tokio, 2011. Effect of tellurium deposition rate on the properties of Cu-In-Te based thin films and solar cells. J. Cryst. Growth, 314: 76-80.
Direct Link  |  

Tembhurkar, Y.D., 2016. Annealing effect on structural and electrical properties of CuInTe2 thin films. Intl. J. Sci. Res., 5: 504-506.

Wasim, S.M., A.L. Vielma and C. Rincon, 1984. Optical absorption study of CuInTe2 crystals grown from near stoichiometric compositions. Solid State Commun., 51: 935-937.
Direct Link  |  

Zedan, I.T. and E.M.E. Menyawy, 2016. Illumination induced changes on the optical functions and valence band splitting parameters of flash evaporated CuInTe2 films. Opt. Intl. J. Light Electron Opt., 127: 1301-1306.
Direct Link  |  

Zhang, X., K. Shen, Z. Jiao and X. Huang, 2013. A study of the electronic structures and optical properties of CuXTe2 (x=Al, ga, In) ternary semiconductors. Comput. Theor. Chem., 1010: 67-72.
Direct Link  |  

Design and power by Medwell Web Development Team. © Medwell Publishing 2024 All Rights Reserved