References

Camotim, D. and P.B. Dinis, 2011. Coupled instabilities with distortional buckling in cold-formed steel lipped channel columns. Thin Walled Struct., 49: 562-575.
Direct Link  |  

Dimopoulos, C.A. and C.J. Gantes, 2008. Design of circular steel arches with hollow circular cross-sections according to EC3. J. Constr. Steel Res., 64: 1077-1085.
Direct Link  |  

Dinis, P.B. and D. Camotim, 2011. Post-buckling behaviour and strength of cold-formed steel lipped channel columns experiencing distortional-global interaction. Comput. Struct., 89: 422-434.
Direct Link  |  

Ellobody, E., 2013. A consistent nonlinear approach for analysing steel, cold-formed steel, stainless steel and composite columns at ambient and fire conditions. Thin Walled Struct., 68: 1-17.
Direct Link  |  

Gunalan, S. and M. Mahendran, 2013. Improved design rules for fixed ended cold-formed steel columns subject to flexural-torsional buckling. Thin Walled Struct., 73: 1-17.
Direct Link  |  

Guo, Y.L., H. Chen, Y.L. Pi and M.A. Bradford, 2016. In-plane strength of steel arches with a sinusoidal corrugated web under a full-span uniform vertical load: Experimental and numerical investigations. Eng. Struct., 110: 105-115.
Direct Link  |  

Guo, Y.L., S.Y. Zhao, Y.L. Pi, M.A. Bradford and C. Dou, 2015. An experimental study on out-of-plane inelastic buckling strength of fixed steel arches. Eng. Struct., 98: 118-127.
Direct Link  |  

He, Z. and X. Zhou, 2014. Strength design curves and an effective width formula for cold-formed steel columns with distortional buckling. Thin Walled Struct., 79: 62-70.
Direct Link  |  

Heidarpour, A., M.A. Bradford and J. Liu, 2012. Steel arches subjected to blast loading: A non-discretisation analysis approach. Appl. Math. Modell., 36: 3971-3984.
Direct Link  |  

Leng, J., Z. Li, J.K. and B.W. Schafer, 2014. Shape optimization of cold-formed steel columns with fabrication and geometric end-use constraints. Thin Walled Struct., 85: 271-290.
Direct Link  |  

Ma, W., J. Becque, I. Hajirasouliha and J. Ye, 2015. Cross-sectional optimization of cold-formed steel channels to Eurocode 3. Eng. Struct., 101: 641-651.
Direct Link  |  

Madeira, J.F.A., J. Dias and N. Silvestre, 2015. Multiobjective optimization of cold-formed steel columns. Thin Walled Struct., 96: 29-38.
Direct Link  |  

Martins, A.D., D. Camotim, P.B. Dinis and B. Young, 2015. Local distortional interaction in cold-formed steel columns: Mechanics, testing, numerical simulation and design. Struct., 4: 38-57.
Direct Link  |  

Martins, A.D., P.B. Dinis, D. Camotim and P. Providencia, 2015. On the relevance of local-distortional interaction effects in the behaviour and design of cold-formed steel columns. Comput. Struct., 160: 57-89.
Direct Link  |  

Pi, Y.L. and M.A. Bradford, 2003. Inelastic buckling and strengths of steel I-section arches with central torsional restraints. Thin Walled Struct., 41: 663-689.
Direct Link  |  

Pi, Y.L. and M.A. Bradford, 2004. In-plane strength and design of fixed steel I-section arches. Eng. Struct., 26: 291-301.
Direct Link  |  

Pi, Y.L. and M.A. Bradford, 2014. Effects of nonlinearity and temperature field on in-plane behaviour and buckling of crown-pinned steel arches. Eng. Struct., 74: 1-12.
Direct Link  |  

Sani, M.S.H.M., F. Muftah, C.S. Tan and M.M. Tahir, 2015. Structural behaviour of cold-formed cut-curved channel steel section under compression. Procedia Eng., 125: 1008-1014.
Direct Link  |  

Spoorenberg, R.C., H.H. Snijder, J.C.D. Hoenderkamp and D. Beg, 2012. Design rules for out-of-plane stability of roller bent steel arches with FEM. J. Constr. Steel Res., 79: 9-21.
Direct Link  |  

Wood, J., 2008. A review of literature for the structural assessment of mitred bends. Int. J. Press. Vessels Pip., 85: 275-294.
Direct Link  |