References

Amarnath, M. and P.K. Kankar, 2014. Failure analysis of a grease-lubricated cylindrical roller bearing. Procedia Technol., 14: 59-66.
Direct Link  |  

Amarnath, M. and S.K. Lee, 2015. Assessment of surface contact fatigue failure in a spur geared system based on the tribological and vibration parameter analysis. Meas., 76: 32-44.
Direct Link  |  

Aye, S.A., 2011. Statistical approach for tapered bearing fault detection using different methods. Proceedings of the World Congress on Engineering Vol. 3, July 6-8, 2011, WCE, London, UK., ISBN:978-988-19251-5-2, pp: 6-8.

Bartz, J.W., 1993. Lubrication of Gearing: Lubricants and their Properties, Design of Gears, Practical Gear Lubrication, Failure Analysis. University of Michigan, Ann Arbor, Michigan, ISBN:9780852988312, Pages: 504.

Dyer, D. and R.M. Stewart, 1978. Detection of rolling element bearing damage by statistical vibration analysis. ASME. J. Mech. Des., 100: 229-235.
CrossRef  |  Direct Link  |  

Farcas, F. and M.D. Gafitanu, 1999. Some influence parameters on greases lubricated rolling contacts service life. Wear, 225: 1004-1010.
Direct Link  |  

Gol’eva, V.E., M.I. Rudnev and V.A. Pisanov, 2005. Determination of esters in motor and industrial oils by IR spectrometry. J. Anal. Chem., 60: 719-722.
CrossRef  |  Direct Link  |  

Heng, R.B.W. and M.J.M. Nor, 1998. Statistical analysis of sound and vibration signals for monitoring rolling element bearing condition. Appl. Acoust., 53: 211-226.
Direct Link  |  

Hiremath, N., D.M. Reddy and S. Swamy, 2015. Health monitoring of surface wear of TiN and AlCrN based PVD coated bearings using statistical values of vibration signals. J. Mater. Sci. Surf. Eng., 3: 312-315.
Direct Link  |  

James, R., 2001. Machine condition monitoring, a catalist for change in industrial equipment maintenance. PPM. Technol., 14: 20-40.

Ji, X., Y. Chen, G. Zhao, X. Wang and W. Liu, 2011. Tribological properties of CaCO3 nanoparticles as an additive in lithium grease. Tribol. Lett., 411: 113-119.
CrossRef  |  Direct Link  |  

Lugt, P.M., 2009. A review on grease lubrication in rolling bearings. Tribol. Trans., 52: 470-480.
Direct Link  |  

Mota, V. and L.A. Ferreira, 2009. Influence of grease composition on rolling contact wear: Experimental study. Tribol. Intl., 42: 569-574.
Direct Link  |  

Rakic, R., 2004. The influence of lubricants on cam failure. Tribol. Intl., 37: 365-373.
Direct Link  |  

Sanchez, M.C., J.M. Franco, C. Valencia, C. Gallegos and F. Urquiola et al., 2011. Atomic force microscopy and thermo-rheological characterisation of lubricating greases. Tribol. Lett., 41: 463-470.
CrossRef  |  Direct Link  |