Journal of Engineering and Applied Sciences
Year:
2018
Volume:
13
Issue:
24
Page No.
10461 - 10467
References
Chennakesavarao, B., P.N. Reddy, N.Komariah, and R.D. Malla, 2000. Machinability of Vacuum Hot Pressed Metal Matrix Composites. In: Proceedings of 17th All India Manufacturing Technology Design and Research Conference, Murty, R.L., G. Srihari and C.S.P. Rao (Eds.). Regional Engineering College, Warangal, India, ISBN:81-7023-627-4, pp: 53-56.
Dabade, U.A., S.S. Joshi, R. Balasubramaniam and V.V. Bhanuprasad, 2007. Surface finish and integrity of machined surfaces on Al/SiC
p composites. J. Mater. Process. Technol., 192: 166-174.
CrossRef | Direct Link | Davim, J.P., 2003. Study of drilling metal-matrix composites based on the Taguchi techniques. J. Mater. Process. Technol., 132: 250-254.
CrossRef | Direct Link | Gadakh, V.S., 2012. Parametric optimization of wire electrical discharge machining using TOPSIS method. Adv. Prod. Eng. Manage., 7: 157-164.
CrossRef | Direct Link | Hoecheng, H., S.B., Yen, T. Ishihara and B.K. Yen, 1997. Fundamental turning characteristics of tribology favored graphite/aluminium alloy composites. Compos. Part A. Appl. Sci. Manuf., 28: 813-818.
Direct Link | Joshi, S.S., N. Ramakrishnan, D. Sarathy and P. Ramakrishnan, 1995. Development of the Technology for Discontinuously Reinforced Aluminium Composites. In: Integrated Design and Process Technology, Engin, A.E., T. Ozsu, M.M. Tanik, I.I. Esat and A. Ertas (Eds.). Society for Design and Process Science, Dallas, Texas, pp: 492-497.
Kelly, J.F. and M.G. Cotterell, 2002. Minimal lubrication machining of aluminium Alloys. J. Mater. Process. Technol., 120: 327-334.
CrossRef | Direct Link | Nouari, M., G. List, F. Girot and D. Coupard, 2003. Experimental analysis and optimisation of tool wear in dry machining of Aluminium alloys. Wear, 255: 1359-1368.
CrossRef | Direct Link | Potluri, R., A.E. Kumar, K. Navuri, M. Nagaraju and D.M. Rao, 2016. Buckling analysis of a ring stiffened hybrid composite cylinder. Mater. Sci. Eng., 1491: 1-12.
CrossRef | Direct Link | Prabhakaran, R.T.D., B.J.C. Babu and V.P. Agrawal, 2006. Optimum selection of a composite product system using MADM approach. Mater. Manuf. Processes, 21: 883-891.
CrossRef | Direct Link | Rai, R.N., A.K. Rao, G.L. Dutta and M. Chakraborty, 2013. Forming Behaviour of Al-TiC in Situ Composites. In: Light Metals Technology 2013, Stone, I., B. McKay and Z. Fan (Eds.). Trans Tech Publications, Switzerland, Europe, ISBN-13:978-3-03785-766-3, pp: 418-422.
Thakur, D., B. Ramamoorthy and L. Vijayaraghavan, 2009. Optimization of high speed turning parameters of superalloy Inconel 718 material using Taguchi technique. Indian J. Eng. Mater. Sci., 16: 44-50.
Direct Link | Thirumalai, R. and J.S. Senthilkumaar, 2013. Multi-criteria decision making in the selection of machining parameters for Inconel 718. J. Mechanical Sci. Technol., 27: 1109-1116.
CrossRef | Direct Link | Yang, W.H. and Y.S. Tang, 1998. Design optimization of cutting parameters for turning operations based on the taguchi method. J. Mater. Process. Technol., 84: 122-129.
Direct Link | Zuperl, U., F. Cus and M. Milfelner, 2005. Fuzzy control strategy for an adaptive force control in end-milling. J. Mater. Process. Technol., 164: 1472-1478.
Direct Link |