References

Bakar, N.H., K.M. Hyie, A.S. Ramlan, M.K. Hassan and A. Jumahat, 2014. Mechanical properties of Kevlar reinforcement in Kenaf composites. Appl. Mech. Mater., 465: 847-851.
Direct Link  |  

Chandramohan, D. and J. Bharanichandar, 2013. Natural fiber reinforced polymer composites for automobile accessories. Am. J. Environ. Sci., 9: 494-504.
CrossRef  |  Direct Link  |  

Jin, Y., X. Cheng and Z. Zheng, 2010. Preparation and characterization of phenol-formaldehyde adhesives modified with enzymatic hydrolysis lignin. Bioresour. Technol., 101: 2046-2048.
PubMed  |  Direct Link  |  

Johnsen, B.B., A.J. Kinloch, R.D. Mohammed, A.C. Taylor and S. Sprenger, 2007. Toughening mechanisms of nanoparticle-modified epoxy polymers. Polym., 48: 530-541.
Direct Link  |  

Kaybal, H.B. and H.U. Ahmet, 2016. Characterization of tensile properties and toughness mechanisms on Nano-Al₂O₃ epoxy nanocomposites. Intl. J. Innov. Res. Sci. Eng. Technol., 5: 74-79.
Direct Link  |  

Khoee, S. and N. Hassani, 2010. Adhesion strength improvement of epoxy resin reinforced with nanoelastomeric copolymer. Mater. Sci. Eng. A., 527: 6562-6567.
Direct Link  |  

Liu, F., S. Deng and J. Zhang, 2017. Mechanical properties of epoxy and its carbon fiber composites modified by nanoparticles. J. Nanomater., 2017: 1-9.
Direct Link  |  

Mohanty, A. and V.K. Srivastava, 2012. Compressive failure analysis of alumina nanoparticles dispersed short glass/carbon fiber reinforced epoxy hybrid composites. Intl. J. Sci. Eng. Res., 3: 1-7.
Direct Link  |  

Shaari, N., A. Jumahat, K.H. Yahya and M.F. Sulaiman, 2014. Impact resistance of woven fiber reinforced polymer composites. Adv. Environ. Biol., 8: 2662-2669.
Direct Link  |