References

Alao, A.R., R. Stoll, X.F. Song, T. Miyazaki and Y. Hotta et al., 2017. Surface quality of Yttria-stabilized tetragonal Zirconia polycrystal in CAD/CAM milling, sintering, polishing and sandblasting processes. J. Mech. Behav. Biomed. Mater., 65: 102-116.
PubMed  |  Direct Link  |  

Arroyave, R., L. Kaufman and T.W. Eagar, 2002. Thermodynamic modeling of the Zr-O system. Calphad, 26: 95-118.
Direct Link  |  

Beuer, F., P. Neumeier and M. Naumann, 2009. Marginal fit of 14‐unit zirconia fixed dental prosthesis retainers. J. Oral Rehabil., 36: 142-149.
CrossRef  |  PubMed  |  Direct Link  |  

Callister, W.D. and G.R. David, 2014. Fundamentals of Materials Science and Engineering: An Integrated Approach. 5th Edn., John Wiley & Sons, Hoboken, New Jersey, USA., ISBN:9781119230403, Pages: 933.

Cavalcanti, A.N., R.M. Foxton, T.F. Watson, M.T. Oliveira and M. Giannini et al., 2009. Bond strength of resin cements to a zirconia ceramic with different surface treatments. Operative Dent., 34: 280-287.
PubMed  |  Direct Link  |  

Cavalcanti, A.N., R.M. Foxton, T.F. Watson, M.T. Oliveira and M. Giannini et al., 2009. Y-TZP ceramics: Key concepts for clinical application. Operative Dent., 34: 344-351.
PubMed  |  Direct Link  |  

Ding, H., 2016. Recycling Zirconia dental prostheses waste: A feasibility study. Master Thesis, The University of Hong Kong, Hong Kong.

Elias, C.N., A.M. Melo, D.H.E.S. Santos and D.C. Santos, 2014. Degradation and mechanical properties of Zirconia 3‐unit fixed dental prostheses machined on a CAD/CAM system. Intl. J. Appl. Ceram. Technol., 11: 513-523.
Direct Link  |  

Helvey, G.A., 2008. Zirconia and Computer-aided design/computer-aided manufacturing (CAD/CAM) dentistry. Inside Dent., 4: 72-79.
Direct Link  |  

Hjerppe, J., 2010. The Influence of Certain Processing Factors on the Durability of Yttrium Stabilized Zirconia used as Dental Biomaterial. University of Turku, Turku, Finland, ISBN:978-951-29-4384-5, Pages: 74.

Hmedat, S.J. and A.F. Ibraheem, 2013. An In vitro evaluation of fit of the crowns fabricated by Zirconium Oxide-based ceramic CAD/CAM systems, before and after porcelain firing cycles and after glaze cycles. J. Baghdad College Dent., 25: 43-48.
Direct Link  |  

Hoosain, S.E., 2011. The sintering and optimization of stabilised Zirconia. Ph.D Thesis, University of the Witwatersrand, Johannesburg, South Africa.

Kalpakjian, S. and S. Schmid, 2013. Manufacturing Engineering and Technology. 7th Edn., Pearson, New Jersey, USA, ISBN:9780133151213, Pages: 1224.

Kandaswamy, R., 2010. Optimizing the mechanical properties of partially Yttria Atabilized Zirconia with Alumina additions. Master Thesis, Clemson University, Clemson, South Carolina.

Lawson, N.C., R. Bansal and J.O. Burgess, 2016. Wear, strength, modulus and hardness of CAD/CAM restorative materials. Dent. Mater., 32: e275-e283.
CrossRef  |  PubMed  |  Direct Link  |  

Lucas, T.J., 2015. Analysis of tetragonal to monoclinic phase transformation caused by accelerated artificial aging and the effects of microstructure in stabilized Zirconia. Ph.D Thesis, University of Alabama at Birmingham, Birmingham, Alabama.

Miyazaki, T. and Y. Hotta, 2011. CAD/CAM systems available for the fabrication of crown and bridge restorations. Aust. Dent. J., 56: 97-106.
CrossRef  |  PubMed  |  Direct Link  |  

Othmanm, A., 2017. The effect of Nano-Aluminum oxide on the mechanical and microstructure properties of 3-yttira tetragonal Zirconia polycrystal ceramic. MSc Thesis, University of Kufa, Kufa, Iraq.

Ozkurt, Z. and E. Kazazoglu, 2010. Clinical success of zirconia in dental applications. J. Prosthodontics Implant Esthetic Reconstructive Dent., 19: 64-68.
CrossRef  |  PubMed  |  Direct Link  |  

Rosentritt, M., 2008. A focus on Zirconia: An In-vitro lifetime prediction of Zirconia dental restorations. Ph.D Thesis, University of Amsterdam, Amsterdam, Netherlands.

Strub, J.R., E.D. Rekow and S. Witkowski, 2006. Computer-aided design and fabrication of dental restorations: Current systems and future possibilities. J. Am. Dent. Assoc., 137: 1289-1296.
CrossRef  |  PubMed  |  Direct Link  |  

Tinschert, J., G. Natt, N. Mohrbotter, H. Spiekermann and K.A. Schulze, 2007. Lifetime of Alumina‐ and Zirconia ceramics used for crown and bridge restorations. J. Biomed. Mater. Res. Part B. Appl. Biomater., 80: 317-321.
CrossRef  |  PubMed  |  Direct Link  |  

Uzun, G., 2008. An overview of dental CAD/CAM systems. Biotechnol. Equip., 22: 530-535.
CrossRef  |  Direct Link  |  

Vythilingum, V., 2013. Zirconia nanocomposites for biomedical applications. Ph.D Thesis, University of the Witwatersrand, Johannesburg, South Africa.