Journal of Engineering and Applied Sciences

Year: 2019
Volume: 14
Issue: 20
Page No. 7620 - 7626

Enhancement Cooling System of Three-Phase Distribution Transformer (250 kVA) by using Thermosyphon

Authors : Talib Z. Farge, Sahar R. Al-Sakini and Aseel A. Ismael

References

Amoiralis, E.I., M.A. Tsili, A.G. Kladas and A.T. Souflaris, 2012. Distribution transformer cooling system improvement by innovative tank panel geometries. IEEE. Trans. Dielectr. Electr. Insul., 19: 1021-1028.
CrossRef  |  Direct Link  |  

Azeez, A.K., 2016. Modification in distribution transformer design to reduce temperature rise. MSc Thesis, Univercity of Technology Iraq, Baghdad, Iraq.

Azizi, D., A. Gholami and D. Azizi, 2011. Hot spot temperature analysis in 3 phase transformers using FEM method. Intl. J. Mod. Eng. Res., 1: 425-429.
Direct Link  |  

Dofan, R. and J. Ali, 2011. Study on thermal model for calculating transformer hot spot temperature. Master Thesis, Universiti Tun Hussein Onn Malaysia, Parit Raja, Malaysia.

Gastelurrutia, J., J.C. Ramos, G.S. Larraona, A. Rivas and J. Izagirre et al., 2011. Numerical modelling of natural convection of oil inside distribution transformers. Appl. Therm. Eng., 31: 493-505.
CrossRef  |  Direct Link  |  

Jabbar, M.T., 2013. Electromagnetic modeling and design of 11/0.4 kV distribution transformer. MSc Thesis, Electrical Power Engineering Department, University of Technology, Iraq, Baghdad, Iraq.

Ozsoy, A. and V. Corumlu, 2018. Thermal performance of a thermosyphon heat pipe evacuated tube solar collector using silver-water nanofluid for commercial applications. Renewable Energy, 122: 26-34.
CrossRef  |  Direct Link  |  

Patel, H.E., T. Sundararajan and S.K. Das, 2010. An experimental investigation into the thermal conductivity enhancement in oxide and metallic nanofluids. J. Nanopart. Res., 12: 1015-1031.
CrossRef  |  Direct Link  |  

Rahimpour, E., M. Barati and M. Schafer, 2007. An investigation of parameters affecting the temperature rise in windings with zigzag cooling flow path. Appl. Therm. Eng., 27: 1923-1930.
CrossRef  |  Direct Link  |  

Rashid, N., 2011. Short-time overloading of power transformers. Masters Thesis, Department of Electrical Engineering, KTH Royal Institute of Technology, Stockholm, Sweden.

Roberto T.C.A., 2018. Simulation of a distribution transformer. WSEAS Trans. Fluid Mech., 7: 106-115.

Susa, D., 2005. Dynamic thermal modeling of power transformer. MSc. Thesis, Department of Electrical and Communications Engineering, Helsinki University of Technology, Espoo, Finland.

Design and power by Medwell Web Development Team. © Medwell Publishing 2024 All Rights Reserved