References

AACC, 2000. Method 44-19, Moisture-air Oven Method, Drying at 135°C. 10th Edn., American Association of Cereal Chemists (AACC), St. Paul, MN., USA.

ASAE, 2004. Engineering Standards, Practices and Data. ASAE, St. Joseph, MI., USA.

Aguilera, J.M. and D.W. Stanley, 1999. Micro Structural Principles of Food Processing and Engineering. 2nd Edn., Springer, New Jersey, ISBN: 08-34212560, pp: 1-432.

Anderson, R.A., H.F. Conway, V.F. Pfeifer and L.E.J. Griffin, 1969. Gelatinization of corn grits by roll and extrusion cooking. Cereal Sci. Today, 14: 4-11.

Antila, J.R., K. Seiler and P. Linko, 1993. Production of flat bread by extrusion cooking using different wheat/rye ratios, protein enrichment and grain with poor quality. J. Food Eng., 2: 189-210.
CrossRef  |  

Badrie, N. and W.A. Mellowes, 1991. Effects of extrusion variables on cassava starch extrudates. J. Food Sci., 56: 1334-1337.
CrossRef  |  

Beauchat, L.R., 1981. Microbial stability as affected by water activity. Cereal Foods World, 26: 345-349.

Bhattacharya, S. and M.A. Hanna, 1986. Viscosity modelling of dough in extrusion. J. Food Process Eng., 21: 167-174.
CrossRef  |  Direct Link  |  

Brouillet-Fourmann, S., C. Carrot and N. Mignard, 2003. Gelatinization and gelation of corn starch followed by dynamic mechanical spectroscopy analysis. Rheol. Acta, 42: 110-117.
CrossRef  |  Direct Link  |  

Bruin, S., D.J.V. Zullichem and W. Stolp, 1978. A review of fundamental and engineering aspects of extrusion of biopolymers in a single-screw extruder. J. Food Process Eng., 2: 1-37.
CrossRef  |  

Case, S.E., D.D. Hamann and S.J. Schwartz, 1992. Effect of starch gelatinization on physical properties of extruded what and corn-based products. Cereal Chem., 69: 401-404.

Chang, Y.K. and S.S. Wang, 1998. Advances in extrusion technology (aquaculture/animal feeds and foods). Proceedings of the International Symposium on Animal and Aquaculture Feedstuffs by Extrusion Technology and the International Seminar on Advanced Extrusion Technology in Food Applications, (ISAAFETISAETFA`98), Technomic Publishing Company, Inc., Lancaster, PA., pp: 1-422.

Chauhan, G.S. and G.S. Bains, 1985. Effect of granularity on the characteristics of extruded rice snack. Int. J. Food Sci. Technol., 20: 305-309.
CrossRef  |  

Chevanan, N., K. Muthukumarappan and K.A. Rosentrater, 2009. Extrusion studies of aquaculture feed using distillers dried grains with solubles and whey. Food Bioprocess Technol., 2: 177-185.
Direct Link  |  

Chevanan, N., K. Muthukumarappan, K.A. Rosentrater and J.L. Julson, 2007. Effect of die dimensions on extrusion processing parameters and properties of DDGS-based aquaculture feeds. Cereal Chem., 84: 389-398.
CrossRef  |  

Chevanan, N., K.A. Rosentrater and K. Muthuku-Marappan, 2008. Effects of processing conditions on feed ingredients containing DDGS in single screw extrusion. Food Bioprocess Technology, pp: 1-10.

Chevanan, N., K.A. Rosentrater and K. Muthuku-marappan, 2007. Effect of DDGS, moisture content and screw speed on physical properties of extrudates. Cereal Chem., 85: 132-139.
CrossRef  |  

Chevanan, N., K.A. Rosentrater and K. Muthukumarappan, 2007. Twin-screw extrusion processing of feed blends containing distillers dried grains with solubles (DDGS). Cereal Chem., 84: 428-436.
CrossRef  |  

Chinnaswamy, R. and M.A. Hanna, 1988. Optimum extrusion cooking conditions for maximum expansion of corn starch. J. Food Sci., 53: 834-836.
CrossRef  |  

Chinnaswamy, R., M.A. Hanna and H.F. Zobel, 1989. Microstructural, physico-chemical and macromolecular changes in extrusion-cooked and retrograded corn starch. Cereal Food World, 34: 415-422.

Colonna, P. and C. Mercier, 1983. Macromolecular modifications of manioc starch components by extrusion-cooking with and without lipids. Carbohydr. Polym., 3: 87-108.
CrossRef  |  Direct Link  |  

Colonna, P., J.P. Melcion, B. Vergnes and C. Mercier, 1983. Flow, mixing and residence time distribution of maize starch within a twin screw extruder with a longitudinally-split barrel. J. Cereal Sci., 1: 115-125.

Conway, H.F. and R.A. Anderson, 1973. Protein fortified extruded food products. Cereal Sci. Today, 18: 18-97.

Davidson, V.J., D. Paton, L.L. Diosady and G. Larocque, 1984. Degradation of wheat starch in a single screw extruder: characteristics of extruded starch polymers. J. Food Sci., 49: 453-458.
CrossRef  |  

Davis, A.T. and R.R. Stickney, 1978. Growth responses of Tilapia aurea to dietary protein quality and quantity. J. Am. Fish. Soc., 107: 479-483.
CrossRef  |  

Dozier, W.A., 2001. Cost-effective pellet quality for meat birds. Feed Manage., 52: 21-24.

Faubion, J.M. and R.C. Hoseney, 1982. High temperature short-time extrusion cooking of wheat starch and flour. I. Effect of moisture and lipid on extrudate properties. Cereal Chem., 59: 533-537.

Faubion, J.M. and R.C. Hoseney, 1982. High-temperature short-time extrusion cooking of wheat starch and flour. I. Effect of moisture and flour type on extrudate properties. Cereal Chem., 59: 529-533.

Faubion, J.M., R.C. Hoseney and P.A. Seib, 1982. Functionality of grain components in extrusion. Cereal Foods World, 27: 212-216.

Fennema, O.R., 1985. Carbohydrates. 2nd Edn., Marcel Dekker, New York, ISBN: 0-847-7271-7, pp: 69-139.

Friesen, K.G., J.L. Nelssen, K.C. Behnke and R.D. Goodband, 1992. Ingredient processing: Improving pig feed by extrusion. Feed Manage., 43: 33-38.

Goedeken, D., 1991. Single screw extrusion-cooking of corn starch with selected proteins. M.Sc. Thesis, University of Nebraska, Lincoln, USA.

Gomez, M.H. and J.M. Aguilera, 1984. A physicochemical model for extrusion of corn starch. J. Food Sci., 49: 40-43.
CrossRef  |  Direct Link  |  

Gonzalez, R.J., R.L. Torres, D.M.D. Greef and B.A. Guadalupe, 2005. Effects of extrusion conditions and structural characteristics on melt viscosity of starchy materials. J. Food Eng., 74: 96-107.
CrossRef  |  

Guy, R.C.E. and A.W. Horne, 1988. Extrusion and Co-Extrusion of Cereals: Food Structure. In: Its Creation and Evaluation, Blanshard, J.M.V. and J.V. Mitchell (Eds.). Butterworths, London, ISBN: 0408029501, pp: 331-349.

Harmann, D.V. and J.M. Harper, 1973. Effect of extruder geometry on torque and flow. Trans. ASAE, 16: 941-943.

Harper, J.M., 1981. Extrusion of Foods. Vol. 1-2, CRC Press Inc., Boca Raton, FL., ISBN: 08-49352045, pp: 1-212.

Hashimoto, J.M. and M.V.E. Grossman, 2003. Effects of extrusion conditions on quality of cassava bran/cassava starch extrudates. Int. J. Food Sci. Technol., 38: 511-517.
CrossRef  |  

Himadri, K.D., M.H. Tapani, O.M. Myllymaki and Y. Malkki, 1993. Effects of formulation and processing variables on dry fish feed pellets containing fish waste. J. Sci. Food Agric., 61: 181-187.
CrossRef  |  

Jamin, F.F. and R.A. Flores, 1998. Effect of separation and grinding of corn dry-milled streams on physical properties of single-screw low speed extruded products. Cereal Chem., 75: 775-779.

Kannadhason, S., K. Muthukumarappan and K.A. Rosentrater, 2009. Effects of ingredients and extrusion parameters on aquafeeds containing DDGS and tapioca starch. J. Aquac. Feed Sci. Nutr., 1: 6-21.
Direct Link  |  

Kannadhason, S., K. Muthukumarappan and K.A. Rosentrater, 2007. Effect of Starch Sources on Extruded Aquaculture Feed Containing DDGS. ASABE, St. Joseph, MI.

Kannadhason, S., K. Muthukumarappan and N. Chevanan, 2007. Effect of Starch Sources on Properties of Extrudates Containing DDGS. ASABE, St. Joseph, MI.

Kazamzadeh, M., 1989. Fish feeds extrusion technology. Feed Manage., 40: 24-28.

Kim, C.N., A.M. Joseph and T.M. Jeffery, 1989. Properties of extruded dried distillers grains DDG and flour blends. J. Food Process Preservat., 13: 219-231.
CrossRef  |  

Lam, C.D. and R.A. Flores, 2003. Effect of particle size and moisture content on viscosity of fish feed. Cereal Chem., 80: 20-24.
CrossRef  |  

Launay, B. and J.M. Lisch, 1983. Twin screw extrusion cooking of starches. Flow behavior of starch pastes, expansion and mechanical properties of extrudates. J. Food Eng., 2: 259-280.
CrossRef  |  

Lin, S., H.E. Huff and F. Hsieh, 2000. Texture and chemical characteristics of soy protein meat analog extruded at high moisture. J. Food Sci., 65: 264-269.
CrossRef  |  

Linko, P., P. Colonna and C. Mercier, 1981. High Temperature Short Time Extrusion Cooking. In: Advances in Cereal Science and Technology, Pomeranz, Y. (Ed.). American Association of Cereal Chemists, St. Paul, MN., ISBN: 0-913250-21-x, pp: 145-235.

Lovell, T., 1988. Nutrition and Feeding of Fish. 1st Edn., Van Nostrand Reinhold, New York, ISBN: 044-2259271, Pages: 260.

Lue, S., F. Hsieh, I.C. Peng and H.E. Huff, 1990. Expansion of corn extrudates containing dietary fiber: A microstructure study. Lebensm Wiss Technol., 23: 165-173.
Direct Link  |  

Maga, J.A. and O.O. Fapojuwo, 1986. Extrusion of corn grits containing various levels of hydrocolloids. Int. J. Food Sci. Technol., 21: 61-66.
CrossRef  |  

Mercier, C. and P. Feillet, 1975. Modification of carbohydrate components by extrusion-cooking of cereal products. Cereal Chem., 52: 283-297.
Direct Link  |  

Mercier, C., P. Linko and J.M. Harper, 1989. Extrusion Cooking. American Association of Cereal Chemists, St. Paul, MN., USA., Pages: 471.

Meuser, F. and W. Wiedmann, 1989. Extrusion Plant Design. In: Extrusion Cooking. Mercier, C., P. Linko and M.J. Harper (Eds.). American Association of Cereal Chemists, St. Paul, Minnesota, USA., pp: 89-155.

Meuser, F., W. Pfaller and B. Van Lengerich, 1987. Technological Aspects Regarding Specific Changes to the Characteristic Properties of Extrudates by HTST Extrusion Cooking. In: Extrusion Technology for the Food Industry, O�Connor, C. (Ed.). Elsevier Applied Science Publishers, New York, pp: 35-53.

Ng, W.K., 2003. The potential use of palm kernel meal in aquaculture feeds. Aquac. Asia, 8: 38-39.
Direct Link  |  

Noel, T.R., S.G. Ring and W.A. Whittam, 1990. Glass transitions in low-moisture foods. Trends Food Sci. Technol., 1: 62-67.
CrossRef  |  

Paton, D. and W.A. Spratt, 1984. Component interactions in the extrusion cooking process: Influence of process conditions on the functional viscosity of the wheat flour system. J. Food Sci., 49: 1380-1385.
CrossRef  |  

Riaz, M.N., 1997. Using extrusion to make floating and sinking fish feed: Controlling the water stability of feed. Feed Manage., 48: 21-24.

Robutti, J., F. Borras, R. Gonzalez, R. Torres and D.D. Greef, 2002. Endosperm properties and extrusion cooking behavior of maize cultivars. Lebensm Wiss Technol., 35: 663-669.
CrossRef  |  

Rokey, G. and G. Plattner, 2003. A practical approach to aqua feed extrusion. Feed Manage., 54: 24-27.

Rokey, G. and G. Plattner, 2004. Extruded aqua feeds: Controlling buoyancy. Feed Manage., 55: 6-11.

Rosentrater, K.A., T.L. Richard, C.J. Bern and R.A. Flores, 2005. Small scale extrusion of corn masa byproducts. Cereal Chem., 82: 436-446.
CrossRef  |  

Sahagu, J.F. and J.M. Harper, 1979. Effects of screw restrictions on the performance of an autogenous extruder. J. Food Process Eng., 3: 199-216.
CrossRef  |  

Seiler, K., D. Weipert and W. Seibel, 1980. Viscosity Behavior of Ground Extrusion Products in Relation to Different Parameters. In: Food Process Engineering, Food Processing Systems, Linko, P., Y. Malkki and J. Olkku (Eds.). Elsevier Applied Science Publishers, London, ISBN: 0853348960, pp: 808-820.

Shukla, C.Y., K. Muthukumarappan and J.L. Julson, 2005. Effect of single screw extruder die temperature, amount of distillers dried grains with solubles DDGS and initial moisture content on extrudates. Cereal Chem., 82: 34-37.
CrossRef  |  

Shurson, J., 2003. Feeding new generation DDGS to swine. Feed Manage., 54: 17-20.

Sokhey, A.S., A.N. Kollengode and M.A. Hanna, 1994. Screw configuration effects on corn starch expansion during extrusion. J. Food Sci., 59: 895-898, 908-909.
CrossRef  |  

Sriburi, P. and S.E. Hill, 2000. Extrusion of cassava starch with either variations in ascorbic acid concentration or pH. Int. J. Food Sci. Technol., 35: 141-154.
CrossRef  |  Direct Link  |  

Sriburi, P., S.E. Hill and F. Barclay, 1999. Depolymerization of cassava starch. Carbohyd Polymer, 38: 211-218.
CrossRef  |  

Tid, W., J.H.C.D. Webster and D.H. Yancey, 1990. Evaluation of distillers grains with solubles in prepared channel catfish diets. Trans. Kentucky Acad. Sci., 51: 135-138.

Turner, R., 1995. Achieving optimum pellet quality. Feed Manage., 46: 30-33.

Van, Z.D.J., T. Jager and W. Stolp, 1988. Residence time distributions in extrusion cooking. Part II. Single-screw extruders processing maize and soya. J. Food Eng., 7: 197-210.
CrossRef  |  

Webster, C.D., J.H. Tidwell and L.S. Goodgame, 1993. Growth, body composition and organoleptic evaluation of channel catfish fed diets containing different percentages of distillers grains with solubles. Prog. Fish. Cult., 55: 95-100.
CrossRef  |  

Williams, M.A., 1991. Feed processing extruded starter pig feeds. Feed Manage., 42: 20-23.

Wu, Y.V., R.R. Rostagi, D.J. Sessa and P.B. Brown, 1996. Effects of diets containing various levels of protein and ethanol coproducts from corn on growth of tilapia fry. J. Agric. Food Chem., 44: 1491-1493.
CrossRef  |