References

Alves, P.V., R.M. Lima Filho, E. Telles and A. Bolognese, 2007. Surface roughness of acrylic resins after different curing and polishing techniques. Angle Orthod., 77: 528-531.
CrossRef  |  PubMed  |  Direct Link  |  

Austin, A.T. and R.M. Basker, 1980. The level of residual monomer in acrylic denture base materials. Br. Dent. J., 149: 281-286.
PubMed  |  Direct Link  |  

Azzarri, M.J., M.S. Cortizo and J.L. Alessandrini, 2003. Effect of the curing conditions on the properties of an acrylic denture base resin microwave- polymerized. J. Dent. Mater., 31: 463-468.
CrossRef  |  PubMed  |  Direct Link  |  

Blagojevic, V. and V.M. Murphy, 1999. Microwave polymerization of denture base materials. A comparative study. J. Oral Rehabil., 26: 804-808.
CrossRef  |  PubMed  |  Direct Link  |  

Craig, R.G., 2002. Restorative Dental Material. 11th Edn., The CV. Mosby Co., St. Louis, ISBN: 0-323-01442-9.

Craig, R.G., W.I. Brein and J.M. Power, 2000. Dental Materials Properties and Manipulation. 7th Edn., The CV Mosby Co., St. Louis, ISBN: 0-323-00512-8, pp: 257-282.

Dogan, A., B. Bek, N.N. Cevik and A. Usanmaz, 1995. The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption. J. Dent. Mater., 23: 313-318.
PubMed  |  

Duray, S.J. and J.L. Gilbert, 1997. Comparison of chemical analysis of residual monomer in a chemical-cured dental acrylic material to an FTIR method. J. Dent. Mater., 13: 240-245.
PubMed  |  Direct Link  |  

Faltermeier, A., M. Rosentritt and D. Mussig, 2007. Acrylic removable appliances: Comparative evaluation of different post polymerization methods. Am. J. Orthod. Dentofacial Orthop., 131: 301-301.
CrossRef  |  PubMed  |  Direct Link  |  

Fletcher, A.M., S. Purnaveja, W.M. Amin, G.M. Ritchie and S. Moradians, 1983. The level of residual monomer in self curing denture base materials. J. Dent. Res., 62: 118-120.
PubMed  |  Direct Link  |  

Harrison, A. and R. Huggett, 1992. Effect of the curing cycle on residual monomer levels of acrylic resin denture base polymers. J. Dent. Mater., 20: 370-374.
PubMed  |  Direct Link  |  

Huggett, R., S.C. Brooks and J.F. Bates, 1984. The effect of different curing cycles on levels of residual monomer in acrylic resin denture base materials. Quintessence Dent. Technol., 8: 365-371.
PubMed  |  Direct Link  |  

Imazato, S.M.C., J.F. Cabe and H. Tarumi, 2001. Degree of conversion of composites measured by DTA and FTIR. J. Dent. Mater., 17: 178-183.
CrossRef  |  PubMed  |  

Jagger, R.G., 1978. Effect of the curing cycle on some properties of a poly methylmethacrylate denture base material. J. Oral Rehabil., 5: 151-157.
PubMed  |  Direct Link  |  

Kalipcilar, B., L. Karaagaclioglu and U. Hasan Reisoglu, 1991. Evaluation of the level of residual monomer in acrylic denture base materials having different polymerization properties. J. Oral Rehabil., 18: 399-401.
PubMed  |  Direct Link  |  

Kedjarune, U., N. Charoenworaluk and S. Koontongkaew, 1999. Release of methyl methacrylate from heat-cured and auto polymerized resins: Cytotoxicity testing related to residual monomer. Aust. Dent. J., 44: 25-30.
CrossRef  |  PubMed  |  Direct Link  |  

McCabe, J.F. and RM. Basker, 1976. Tissue sensitivity to acrylic resin. A method of measuring the residual monomer content and its clinical application. Br. Dent. J., 140: 347-350.
PubMed  |  Direct Link  |  

Miettinen, V.M. and P.K. Vallittu, 1997. Release of residual methacrylate into water from glass fiber-poly (methylmethacrylate) composite used in dentures. Biomaterials, 18: 181-185.
CrossRef  |  PubMed  |  

Miettinen, V.M., K.K. Narva and P.K. Vallittu, 1999. Water sorption, solubility and effect of post-curing of glass fiber reinforced polymers. Biomaterials, 20: 1187-1194.
CrossRef  |  PubMed  |  

Pfeiffer, P. and E.U. Rosenbauer, 2004. Residual methyl methacrylate monomer, water sorption and water solubility of hypoallergenic denture base materials. J. Prosthet. Dent., 92: 72-78.
CrossRef  |  PubMed  |  

Rose, E.C., J. Bumann, I.E. Jonas and H.F. Kappert, 2000. Contribution to the biological assessment of orthodontic acrylic materials. Orofac Orthop., 61: 246-257.
CrossRef  |  PubMed  |  Direct Link  |  

Sadamori, S. and H. Kotani, 1992. The usage period of dentures and their residual monomer contents. J. Prosthet. Dent., 68: 374-376.
PubMed  |  Direct Link  |  

Shim, J.S. and D.C. Watts, 1999. Residual monomer concentrations in denture-base acrylic resin after an additional, soft-liner, heat-cure cycle. J. Dent. Mater., 15: 296-300.
CrossRef  |  PubMed  |  

Tsuchiya, H., Y. Hoshino, K. Tajima and N. Takagi, 1994. Leaching and cytotoxicity of formaldehyde and methyl methacrylate from acrylic resin denture base materials. J. Prosthet. Dent., 71: 618-624.
CrossRef  |  PubMed  |  

Umemoto, K. and S. Kurata, 1997. Basic study of a new denture base resin applying hydrophobic methacrylate monomer. Dent. Mater. J., 16: 21-30.
PubMed  |  Direct Link  |  

Urban, V.M., A.L. Machado and R.V. Oliveira, 2007. Residual monomer of reline acrylic resins. Effect of water bath and microwave post polymerization treatments. Dent. Mater., 23: 363-368.
CrossRef  |  PubMed  |  

Vallittu, P.K., 1996. The effect of surface treatment of denture acrylic resin on the residual monomer content and its release into water. Acta Odontol. Scand., 54: 188-192.
PubMed  |  

Vallittu, P.K., I.E. Ruyter and S. Buykuilmaz, 1998. Effect of polymerization temperature and time on the residual monomer content of denture base polymers. Eur. J. Oral Sci., 106: 588-593.
PubMed  |  Direct Link  |  

Vallittu, P.K., V. Miettinen and P. Alakuijala, 1995. Residual monomer content and its release into water from denture base materials. Dent. Mater., 11: 338-342.
PubMed  |  Direct Link  |  

Wong, D.M., L.Y. Cheng, T.W. Chow and P.K. Clark, 1999. Effect of processing method on the dimensional accuracy and water sorption of acrylic resin denture. J. Prosthet. Dent., 81: 300-304.
PubMed  |  Direct Link  |