Journal of Engineering and Applied Sciences
Year:
2016
Volume:
11
Issue:
9
Page No.
1958 - 1961
References
Baker, R.W., 2002. Future directions of membrane gas separation technology. Ind. Eng. Chem. Res., 41: 1393-1411.
CrossRef | Direct Link | Bernardo, P., E. Drioli and G. Golemme, 2009. Membrane gas separation: A review/state of the art. Ind. Eng. Chem. Res., 48: 4638-4663.
CrossRef | Direct Link | Bos, A., I.G.M. Punt, M. Wessling and H. Strathmann, 1999. CO
2-induced plasticization phenomena in glassy polymers. J. Membr. Sci., 155: 67-78.
Direct Link | Dong, G., H. Li and V. Chen, 2011. Plasticization mechanisms and effects of thermal annealing of Matrimid hollow fiber membranes for CO
2 removal. J. Membr. Sci., 369: 206-220.
Direct Link | Ettouney, H. and U. Majeed, 1997. Permeability functions for pure and mixture gases in silicone rubber and polysulfone membranes: Dependence on pressure and composition. J. Membr. Sci., 135: 251-261.
Direct Link | Horn, N.R. and D.R. Paul, 2011. Carbon dioxide plasticization and conditioning effects in thick vs. thin glassy polymer films. Polym., 52: 1619-1627.
Direct Link | Ismail, A.F. and N. Yaacob, 2006. Performance of treated and untreated asymmetric polysulfone hollow fiber membrane in series and cascade module configurations for CO
2/CH
4 gas separation system. J. Membr. Sci., 275: 151-165.
Ismail, A.F. and W. Lorna, 2002. Penetrant-induced plasticization phenomenon in glassy polymers for gas separation membrane. Sep. Purif. Technol., 27: 173-194.
Direct Link | Ismail, A.F., I.R. Dunkin, S.L. Gallivan and S.J. Shilton, 1999. Production of super selective polysulfone hollow fiber membranes for gas separation. Polym., 40: 6499-6506.
Direct Link | Kapantaidakis, G.C., G.H. Koops, M. Wessling, S.P. Kaldis and G.P. Sakellaropoulos, 2003. CO
2 Plasticization of polyethersulfone/polyimide gas separation membranes. AIChE. J., 49: 1702-1711.
CrossRef | Direct Link | Kawakami, H., K. Nakajima, H. Shimizu and S. Nagaoka, 2003. Gas permeation stability of asymmetric polyimide membrane with thin skin layer: Effect of polyimide structure. J. Membr. Sci., 212: 195-203.
Direct Link | Krol, J.J., M. Boerrigter and G.H. Koops, 2001. Polyimide hollow fiber gas separation membranes: Preparation and the suppression of plasticization in propane/propylene environments. J. Membr. Sci., 184: 275-286.
Direct Link | Scholes, C.A., G.Q. Chen, G.W. Stevens and S.E. Kentish, 2010. Plasticization of ultra-thin polysulfone membranes by carbon dioxide. J. Membr. Sci., 346: 208-214.
Direct Link |