References

Ajay, S. and R. Abhinandan, 2010. Study of hydroxyapatite and hydroxyapatite-chitosan composite coatings on stainless steel by electrophoretic deposition method. Master Thesis, National Institute of Technology, Rourkela, India.

Balla, V.K., M. Das, S. Bose, G.J. Ram and I. Manna, 2013. Laser surface modification of 316 L stainless steel with bioactive hydroxyapatite. Mater. Sci. Eng. C., 33: 4594-4598.
PubMed  |  Direct Link  |  

Ghaith, E.S., S. Hodgson and M. Sharp, 2015. Laser surface alloying of 316L stainless steel coated with a bioactive hydroxyapatite-titanium oxide composite. J. Mater. Sci. Med., Vol. 26, 10.1007/s10856-015-5399-1

Hermawan, H., D. Ramdan and J.R.P. Djuansjah, 2011. Metals for biomedical applications. Master Thesis, Faculty of Biomedical Engineering and Health Science, University Teknologi Malaysia, Johor Bahru, Malaysia.

Kwok, C.T., P.K. Wong, F.T. Cheng and H.C. Man, 2009. Characterization and corrosion behavior of hydroxyapatite coatings on Ti6Al4V fabricated by electrophoretic deposition. Appl. Sur. Sci., 255: 6736-6744.
CrossRef  |  Direct Link  |  

Nawal, M.D., 2014. Preparation and characterization of bio nitinol with addition of Copper. Ph.D Thesis, Materials Engineering Department, University of Technology, Iraq, Baghdad, Iraq.

Ng, K.W., H.C. Man and T.M. Yue, 2011. Characterization and corrosion study of NiTi laser surface alloyed with Nb or CO. Appl. Surf. Sci., 257: 3269-3274.
CrossRef  |  Direct Link  |  

Ohtsuki, C., 2011. How to prepare the Simulated Body Fluid (SBF) and its related solutions, proposed by Kokubo and his colleagues. BA. Thesis, Kyoto University, Kyoto, Japan.

Okazaki, Y., E. Gotoh, T. Manabe and K. Kobayashi, 2004. Comparison of metal concentrations in rat tibia tissues with various metallic implants. Biomater., 25: 5913-5920.
CrossRef  |  PubMed  |  Direct Link  |  

Puleo, D.A. and W.W. Huh, 1995. Acute toxicity of metal ions in cultures of osteogenic cells derived from bone marrow stromal cells. J. Appl. Biomater., 6: 109-116.
Direct Link  |  

Shalabi, M.M., J.G. Wolke, V.M. Cuijpers and J.A. Jansen, 2007. Evaluation of bone response to titanium-coated polymethyl methacrylate resin (PMMA) implants by X-ray tomography. J. Mater. Sci. Mater. Med., 18: 2033-2039.
CrossRef  |  PubMed  |  Direct Link  |  

Singh, R. and N.B. Dahotre, 2007. Corrosion degradation and prevention by surface modification of biometallic materials. J. Mater. Sci. Med., 18: 725-751.
CrossRef  |  Direct Link  |  

Smausz, T., B. Hopp, H. Huszar, Z. Toth and G. Kecskemeti, 2004. Pulsed laser deposition of bioceramic thin films from human tooth. Appl. Phys. A., 79: 1101-1103.
CrossRef  |  Direct Link  |  

Smausz, T., B. Hopp, H. Huszar, Z. Toth and G. Kecskemeti, 2004. Pulsed laser deposition of bioceramic thin films from human tooth. Appl. Phys. A., 79: 1101-1103.
CrossRef  |  Direct Link  |