References

Al-Badour, F., M. Sunar and L. Cheded, 2011. Vibration analysis of rotating machinery using time-frequency analysis and wavelet techniques. Mech. Syst. Signal Process., 25: 2083-2101.
Direct Link  |  

Alicim, G. and B. Shirinzadehm, 2005. A systematic technique to estimate positioning errors for robot accuracy improvement using laser interferometry based sensing. Mech. Machine Theor., 40: 879-906.
CrossRef  |  Direct Link  |  

Betta, G. and A. Pietrosanto, 2000. Instrument fault detection and isolation: State of the art and new research trends. IEEE. Trans. Instrum. Meas., 49: 100-107.
CrossRef  |  Direct Link  |  

Canini, G. and C. Fantuzzi, 2001. [Motion Control for Automatic Machines]. Pitagora Publisher, Rome, Italy, ISBN:9788837113742, Pages: 228 (In Italian).

Chow, T.W. and S. Hai, 2004. Induction machine fault diagnostic analysis with wavelet technique. IEEE. Trans. Ind. Electron., 51: 558-565.
CrossRef  |  Direct Link  |  

D'Emilia, G., A. Gaspari and E. Natale, 2015. Dynamic calibration uncertainty of three-axis low frequency accelerometers. Acta Imeko, 4: 75-81.
CrossRef  |  Direct Link  |  

D'Emilia, G., D.D. Gasbarro and E. Natale, 2015. A simple and accurate solution based on a laser sheet system for on line position monitoring of welding. J. Phys. Conf. Ser., 658: 1-10.
Direct Link  |  

Demirtas, M., 2011. Off-line tuning of a PI speed controller for a permanent magnet brushless DC motor using DSP. Energy Convers. Manage., 52: 264-273.
CrossRef  |  Direct Link  |  

Ferrari, V., A. Ghisla, D. Marioli and A. Taroni, 2004. Capacitive angular-position sensor with electrically-floating conductive rotor and measurement redundancy. Proceedings of the 21st IEEE Conference Instrumentation and Measurement Technology (IMTC’04), May 18-20, 2004, IEEE, Como, Italy, pp: 2320-2325.

Hauptmann, P.R., 2006. Selected examples of intelligent (micro) sensor systems: State-of-the-art and tendencies. Meas. Sci. Technol., 17: 459-466.
CrossRef  |  Direct Link  |  

Kai, T., H. Sekiguchi and H. Ikeda, 2018. Relative vibration suppression in a positioning machine using acceleration feedback control. IEEJ. J. Ind. Appl., 7: 15-21.
CrossRef  |  Direct Link  |  

Lv, F. and H. Du, 2004. Fault characteristics extraction of motor's vibratory signal based on wavelet transform. Proceedings of the 5th World Conference on Intelligent Control and Automation Vol. 2 (WCICA’04), June 15-19, 2004, IEEE, Hangzhou, China, pp: 1756-1760.

Singh, G.K. and S.A.A.S. Al-Kazzaz, 2009. Isolation and identification of dry bearing faults in induction machine using wavelet transform. Tribol. Intl., 42: 849-861.
CrossRef  |  Direct Link  |  

Su, H., K.T. Chong and R.R. Kumar, 2011. Vibration signal analysis for electrical fault detection of induction machine using neural networks. Neural Comput. Appl., 20: 183-194.
CrossRef  |  Direct Link  |  

Widodo, A. and B.S. Yang, 2008. Wavelet support vector machine for induction machine fault diagnosis based on transient current signal. Expert Syst. Appl., 35: 307-316.
CrossRef  |  Direct Link  |  

Yin, Z., L. Gong, C. Du, J. Liu and Y. Zhong, 2017. Robustness of servo drive system under position control mode based on sliding mode controller. Proceedings of the IEEE Conference Transportation Electrification Asia-Pacific (ITECAsia-Pacific’17), August 7-10, 2017, IEEE, Harbin, China, ISBN:978-1-5386-2895-9, pp: 1-6.

Yiu, Y.K., J. Meng and Z.X. Li, 2003. Auto-calibration for a parallel manipulator with sensor redundancy. Proceedings of the IEEE International Conference on Robotics and Automation Vol. 3 (ICRA'03), 14-19, 2003, IEEE, Taipei, Taiwan, pp: 3660-3665.